• May 26, 2019, 05:55:30 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: dap-2310  (Read 3780 times)

randymanchester

  • Level 1 Member
  • *
  • Posts: 1
dap-2310
« on: June 27, 2013, 06:47:19 AM »

I'm having an issue getting internet access using a DAP-2310 WAP with my samsung galaxy tab 2.  I can get access from my ipad and iphone so I know it's working somewhat correctly.   

The device connects and gets an IP but then says that the website is not available.  I can ping the device on the network.

The firmware is 1.5


Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 47394
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dap-2310
« Reply #1 on: June 27, 2013, 06:52:10 AM »

Link>Welcome!
  • What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion
  • Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under
  • What wireless modes are you using?
  • 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
Logged
Cable:200mb/10Mb>NetGear C7800>DIR-882>DGS-1100>HP 24pt Gb Switch. COVR-3902/2202/1203,DIR-2680,890L,882,880L,868L,DNR-202L,DNS-345x2,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting