• June 20, 2019, 04:32:18 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D-Link WDA-1320 wireless card doesn't work on Slax Linux  (Read 12094 times)

ronaldocpontes

  • Level 1 Member
  • *
  • Posts: 6
D-Link WDA-1320 wireless card doesn't work on Slax Linux
« on: May 17, 2010, 04:36:08 PM »


Follow up: http://www.slax.org/forum.php?action=view&parentID=61942

Hi,

I can't boot Slax on my desktop pc with a D-Link WDA-1320 wireless card (atheros chipset).

The boot process hangs up on the following lines:

Triggering udev events: /sbin/udevtrigger --- (hangs on here for 2 - 3 minutes)
Module dependencies up to date (no new kernel modules found)



If I take the wireless pci card out of the pc, Slax will boot normally. It also runs ok from my HP Pavillion laptop.

The desktop has a Asus kv8-mx motherboard with latest Bios release: 0211.
(Disabling the Floppy drive on the BIOS won't make any effect on the boot process)

There are only the basic hardware (cd-rom, hd, ps2 mouse and keyboard) and the wireless card is the only PCI card on it.

I've built a USB flash drive with Slax (latest version 6.1.2) using UNetBootin.

Does someone know how can I use Slax with this d-link wireless card?

Thx
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #1 on: May 18, 2010, 01:17:02 PM »

Ideally we need to figure out why udev is hanging, does udev have any logs for us?
Do you get any boot logs?
Anything interesting in your dmesg?
What is the exact device string you see under a lspci?
Does the correct module show loaded under lsmod?
Logged
non progredi est regredi

ronaldocpontes

  • Level 1 Member
  • *
  • Posts: 6
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #2 on: May 18, 2010, 02:43:11 PM »

I can't verify any of your questions because the computer does not boot!

How can I get the computer to boot with the card attached and where do I find the boot logs and dmsg?
« Last Edit: May 18, 2010, 02:45:21 PM by ronaldocpontes »
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #3 on: May 18, 2010, 03:43:41 PM »

I thought it hung for 2-3 minutes and then booted by your description.  Does Slax have a non-udev boot.
Logged
non progredi est regredi

ronaldocpontes

  • Level 1 Member
  • *
  • Posts: 6
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #4 on: May 26, 2010, 06:57:16 AM »

I've booted the PC with ANOTHER LINUX DISTRO....


lspci output:

00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0b.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01)



lsmod output:


odule                  Size  Used by
via                    28868  2
drm                   104121  3 via
snd_seq_dummy            764  0
snd_seq_oss            17983  0
snd_seq_midi_event      3067  1 snd_seq_oss
snd_seq                29843  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            23441  0
snd_mixer_oss           8721  2 snd_pcm_oss
ipv6                  186406  10
pcmcia                 19386  0
pcmcia_core            18839  1 pcmcia
firmware_class          4070  1 pcmcia
lp                      5532  0
ppdev                   3812  0
parport_pc             22473  0
parport                19732  3 lp,ppdev,parport_pc
pcspkr                   976  0
arc4                     856  2
ecb                     1040  2
snd_via82xx            12740  1
gameport                5084  1 snd_via82xx
snd_ac97_codec         67450  1 snd_via82xx
ath5k                 102677  0
ac97_bus                 532  1 snd_ac97_codec
mac80211              118418  1 ath5k
snd_pcm                37286  3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer              10858  2 snd_seq,snd_pcm
snd_page_alloc          4445  2 snd_via82xx,snd_pcm
snd_mpu401_uart         3023  1 snd_via82xx
ath                     5940  1 ath5k
viafb                  59451  1
cfg80211               86130  3 ath5k,mac80211,ath
snd_rawmidi            10823  1 snd_mpu401_uart
rtc_cmos                5424  0
amd64_agp               5340  1
asus_atk0110            6260  0
rfkill                  8582  1 cfg80211
i2c_algo_bit            3254  1 viafb
via_rhine              13152  0
rtc_core                8751  1 rtc_cmos
snd_seq_device          3169  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
k8temp                  2152  0
agpgart                18361  2 drm,amd64_agp
led_class               1499  1 ath5k
mii                     2567  1 via_rhine
rtc_lib                 1194  1 rtc_core
snd                    29236  11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
hwmon                    914  2 asus_atk0110,k8temp
shpchp                 19607  0
i2c_viapro              4124  0
evdev                   4984  7
psmouse                36913  0
i2c_core               10382  4 drm,viafb,i2c_algo_bit,i2c_viapro
serio_raw               2484  0
pci_hotplug            17774  1 shpchp
soundcore               3340  2 snd
sg                     14956  0
fuse                   38264  9
aufs                  110734  1
squashfs               16155  9


Logged

ronaldocpontes

  • Level 1 Member
  • *
  • Posts: 6
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #5 on: May 26, 2010, 06:58:20 AM »

dmesg output:

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bfa0000 (usable)
 BIOS-e820: 000000001bfa0000 - 000000001bfb0000 (ACPI data)
 BIOS-e820: 000000001bfb0000 - 000000001bff0000 (ACPI NVS)
 BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1bfa0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFE0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-000000001bfa0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001bc00000 page 2M
 001bc00000 - 001bfa0000 page 4k
kernel direct mapping tables up to 1bfa0000 @ 15000-1a000
RAMDISK: 1bd96000 - 1bf9f578
ACPI: RSDP 000fa9f0 00021 (v02 ACPIAM)
ACPI: XSDT 1bfa0100 0003C (v01 A M I  OEMXSDT  03000620 MSFT 00000097)
ACPI: FACP 1bfa0290 000F4 (v03 A M I  OEMFACP  03000620 MSFT 00000097)
ACPI: DSDT 1bfa03e0 042E1 (v01  A0310 A0310001 00000001 MSFT 0100000D)
ACPI: FACS 1bfb0000 00040
ACPI: APIC 1bfa0390 0004A (v01 A M I  OEMAPIC  03000620 MSFT 00000097)
ACPI: OEMB 1bfb0040 0003F (v01 A M I  OEMBIOS  03000620 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
447MB LOWMEM available.
  mapped low ram: 0 - 1bfa0000
  low ram: 0 - 1bfa0000
  node 0 low ram: 00000000 - 1bfa0000
  node 0 bootmap 00016000 - 000197f4
(14 early reservations) ==> bootmem [0000000000 - 001bfa0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0001000000 - 00015988b8]    TEXT DATA BSS ==> [0001000000 - 00015988b8]
  #3 [001bd96000 - 001bf9f578]          RAMDISK ==> [001bd96000 - 001bf9f578]
  #4 [0001599000 - 000159f20c]              BRK ==> [0001599000 - 000159f20c]
  #5 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
  #6 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
  #7 [000009fc00 - 00000f0c30]    BIOS reserved ==> [000009fc00 - 00000f0c30]
  #8 [00000f0d60 - 00000ff780]    BIOS reserved ==> [00000f0d60 - 00000ff780]
  #9 [00000f0c30 - 00000f0d60]     MP-table mpc ==> [00000f0c30 - 00000f0d60]
  #10 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
  #11 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
  #12 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
  #13 [0000016000 - 000001a000]          BOOTMAP ==> [0000016000 - 000001a000]
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001bfa0
  HighMem  0x0001bfa0 -> 0x0001bfa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0001bfa0
On node 0 totalpages: 114479
free_area_init_node: node 0, pgdat c14de140, node_mem_map c15a1200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 864 pages used for memmap
  Normal zone: 109632 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3780000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c1c00000 s26840 r0 d22312 u4194304
pcpu-alloc: s26840 r0 d22312 u4194304 alloc=1*4194304
pcpu-alloc:
  • 0

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113583
Kernel command line: initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw vga=791 splash=silent quiet autoexec=xconf;telinit~4 changes=/slax/ BOOT_IMAGE=/boot/vmlinuz
bootsplash: silent mode.
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 445732k/458368k available (3547k kernel code, 11920k reserved, 1453k data, 460k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdc7a0000 - 0xff7fe000   ( 560 MB)
    lowmem  : 0xc0000000 - 0xdbfa0000   ( 447 MB)
      .init : 0xc14e3000 - 0xc1556000   ( 460 kB)
      .data : 0xc1376ff8 - 0xc14e2530   (1453 kB)
      .text : 0xc1000000 - 0xc1376ff8   (3547 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1800.165 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.33 BogoMIPS (lpj=1800165)
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 17k freed
ACPI: Core revision 20091214
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Sem****(tm) Processor 3000+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (3600.33 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5428.000 MB/sec
xor: using function: pIII_sse (5428.000 MB/sec)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xf2000000-0xf3ffffff pref]
pci 0000:00:01.0: supports D1
pci 0000:00:0b.0: reg 10: [mem 0xfae00000-0xfae0ffff]
pci 0000:00:0f.0: reg 10: [io  0xe800-0xe807]
pci 0000:00:0f.0: reg 14: [io  0xe400-0xe403]
pci 0000:00:0f.0: reg 18: [io  0xe000-0xe007]
pci 0000:00:0f.0: reg 1c: [io  0xd800-0xd803]
pci 0000:00:0f.0: reg 20: [io  0xd400-0xd40f]
pci 0000:00:0f.0: reg 24: [io  0xd000-0xd0ff]
pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20: [io  0xb800-0xb81f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20: [io  0xc000-0xc01f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20: [io  0xc400-0xc41f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20: [io  0xc800-0xc81f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10: [mem 0xfac00000-0xfac000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
pci 0000:00:11.5: reg 10: [io  0xb400-0xb4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:11.6: reg 10: [io  0x0000-0x00ff]
pci 0000:00:12.0: reg 10: [io  0xb000-0xb0ff]
pci 0000:00:12.0: reg 14: [mem 0xfab00000-0xfab000ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 30: [mem 0xfaf00000-0xfaf0ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf9ffffff pref]
pci_bus 0000:00: on NUMA node 0
Logged

ronaldocpontes

  • Level 1 Member
  • *
  • Posts: 6
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #6 on: May 26, 2010, 06:58:54 AM »

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    574 MB/s
raid6: int32x2    972 MB/s
raid6: int32x4    550 MB/s
raid6: int32x8    367 MB/s
raid6: mmxx1     1480 MB/s
raid6: mmxx2     2613 MB/s
raid6: sse1x1    1398 MB/s
raid6: sse1x2    1988 MB/s
raid6: sse2x1    2281 MB/s
raid6: sse2x2    2882 MB/s
raid6: using algorithm sse2x2 (2882 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: disabling [io  0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0080] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0088] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp 00:08: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:07: [io  0x0290-0x0297] has been reserved
system 00:08: [io  0x03e1-0x03e7] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0400-0x041f] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0x1ffeffff] could not be reserved
pci 0000:00:11.6: BAR 0: assigned [io  0x1000-0x10ff]
pci 0000:00:11.6: BAR 0: set to [io  0x1000-0x10ff] (PCI address [0x1000-0x10ff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf9ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf9ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 2085k freed
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 875
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xf4000000, mapped to 0xdc800000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:6bbb
vesafb: pmi: set display start = c00c6c09, set palette = c00c6c7a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash: scanning last 2MB of initrd for signature
bootsplash 3.1.6-2004/03/31: looking for picture...
 silentjpeg size 72748 bytes,
...found (1024x768, 29925 bytes, v3).
Console: switching to colour frame buffer device 118x42
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfac00000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.2 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.2 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.2 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.2 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.2 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata3.00: ATA-7: SAMSUNG SP0842N, BH100-35, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
usb 1-6: new high speed USB device using ehci_hcd and address 2
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
usb 1-6: New USB device found, idVendor=1307, idProduct=0163
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Mass Storage Device
usb 1-6: Manufacturer: P Technology
usb 1-6: SerialNumber: 2006120000011F
scsi4 : usb-storage 1-6:1.0
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP0842N  BH10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: lzma image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 460k freed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-33-20100405
fuse init (API version 7.13)
pcmcia: Unknown symbol release_firmware
pcmcia: Unknown symbol request_firmware
UDF-fs: No partition found (1)
UDF-fs: No partition found (1)
scsi 4:0:0:0: Direct-Access     UT163    USB Flash Disk   0.00 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdb] 1007616 512-byte logical blocks: (515 MB/492 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.103
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1b000, 00:15:f2:80:cd:14, IRQ 23.
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xf2000000
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
cfg80211: Calling CRDA to update world regulatory domain
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
ath5k 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:00:0b.0: registered as 'phy0'
fbcon: Via (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
ath: EEPROM regdomain: 0x10
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: CO
ath: Regpair used: 0x10
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
cfg80211: Calling CRDA for country: CO
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
input: PC Speaker as /devices/platform/pcspkr/input/input4
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
Intel ISA PCIC probe: port conflict at 0x3e0
not found.
Trying to free nonexistent resource <00000000000003e0-00000000000003e1>
Databook TCIC-2 PCMCIA probe: not found.
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Initialized drm 1.1.0 20060810
viafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
viafb 0000:01:00.0: putting AGP V3 device into 8x mode
wlan0: direct probe to AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: RX AssocResp from 00:1a:3f:49:ec:d6 (capab=0x421 status=0 aid=29)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: BR
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 00:1a:3f:49:ec:d6 by local choice (reason=3)
wlan0: direct probe to AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: direct probe to AP 00:1a:3f:49:ec:d6 (try 2)
wlan0: direct probe to AP 00:1a:3f:49:ec:d6 (try 3)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1a:3f:49:ec:d6 (try 1)
wlan0: RX AssocResp from 00:1a:3f:49:ec:d6 (capab=0x421 status=0 aid=29)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: D-Link WDA-1320 wireless card doesn't work on Slax Linux
« Reply #7 on: May 26, 2010, 01:02:21 PM »

This information should be crucial in the Slax forum you were posting to previously.  I can't do much with it here, but I can tell you it is detected as an ath5k device and the correct module appears to be loading on that other machine.  As for the dmesg, there is some good information there, but letting someone familiar with why that kernel is handling it differently than that other machine's is a good idea.
Logged
non progredi est regredi