• June 17, 2019, 07:32:35 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Using access controls  (Read 3417 times)

g-man

  • Level 1 Member
  • *
  • Posts: 3
Using access controls
« on: May 13, 2010, 02:03:51 PM »

I've set up a web proxy on my LAN and I thought I'd just go in and block all outgoing access to port 80 except from the machine running the proxy. But it's not obvious to me how I can do that with the 4100 access controls.

The router seems to want me to explicitly list the machines I want to block, instead of blocking all by default and listing the one exception. Is that true or am I missing something?

Thanks,
G.
Logged

BlueToast

  • Level 1 Member
  • *
  • Posts: 3
Re: Using access controls
« Reply #1 on: June 01, 2010, 10:02:14 AM »

To use access controls, you need to setup a schedule via Schedules page at http://routerip/Tools_Schedules.html (where routerip is the IP address of your router to access the web-interface). You could setup a schedule that covers Every Day and All Day - 24 hrs. Then you would go to Access Control page at http://routerip/Advanced_Access_Control.html. You would want to create a policy that applies your schedule and you want to select Other Machines and add that to the list of machines affected.

Other Machines means every machine [not listed], which would be anything that is connected to your network.
« Last Edit: June 01, 2010, 10:03:52 AM by BlueToast »
Logged

g-man

  • Level 1 Member
  • *
  • Posts: 3
Re: Using access controls
« Reply #2 on: December 05, 2010, 09:59:41 AM »

I'm missing something. I understand how to set up a rule to block all web access, but I want to have an exception for one machine at a specific IP address. Is there a way to do that?
Logged