D-Link Forums

D-Link IP Cameras for Home => DCS-933L => Topic started by: omnigear on September 26, 2018, 12:22:03 PM

Title: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: omnigear on September 26, 2018, 12:22:03 PM
I cant seem to find the proper configuration to get my 933l to connect to my nvr. what is this camera's setting needed to make it work with my nvr?
(https://i.imgur.com/vLmu6wH.png)(https://i.imgur.com/8ztnBHs.png)(https://i.imgur.com/fDCg9NU.png)(https://i.imgur.com/FymDJbo.png)
Title: Re: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: GreenBay42 on September 26, 2018, 12:40:24 PM
I do not believe the DCS-933L supports RTSP.  Change the port to 554 to test.

If that does not work, can you change the protocol on the laview to http and use port 80?
Title: Re: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: omnigear on September 26, 2018, 01:38:01 PM
no luck :9
Title: Re: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: GreenBay42 on September 26, 2018, 02:12:13 PM
Under protocol on your LaView you selected ONVIF. This camera does not support it. Do you have a "generic" protocol to select?
Title: Re: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: omnigear on September 26, 2018, 02:18:50 PM
custom setting (https://i.imgur.com/FymDJbo.png) is the only other recourse outside of the onvif.
Under protocol on your LaView you selected ONVIF. This camera does not support it. Do you have a "generic" protocol to select?
Title: Re: connecting the DCS-933L to LaView LV-KNT982A42W4
Post by: FurryNutz on September 26, 2018, 02:21:49 PM
Possible that the NVR is not compatible with the 933L. I know my NVR-202L is. Also D-View Cam software from D-Link is as well...Something to try.