D-Link Forums

The Graveyard - Products No Longer Supported => Routers => DIR-890L => Topic started by: tsulak on August 27, 2017, 04:59:42 PM

Title: Speed Limitations with dir-890l
Post by: tsulak on August 27, 2017, 04:59:42 PM
I have a DIR-890l, version A1, firmware 111b02_20170519_beta01.  My internet is Spectrum 60 Mbps but I can't get speeds any faster than 19.1 Mbps.  Doesn't matter if I am connected with a hard ethernet connection or a wireless connection, my speeds are capped at 19.1 Mbps.  I run the band width detect in the QoS Engine section it detects my upload is 6 Mbps and my download is 60 Mbps.  Am I missing something or could I have something set incorrectly in the router setup?

I had a Spectrum tech here and he replaced my modem, reprogrammed my modem, verified my account settings are correct, and replaced my ethernet cable with no changes to my speed using speedtest.net.  He disconnected my 890l and plugged in his own Netgear router and the connection tested at 48 Mbps via speedtest.net.  We plugged my 890l back in and it maxed out at 19.1 Mbps.  I have 29 devices connected to my router.

Any help would be greatly appreciated.  Thanks in advance!
Title: Re: Speed Limitations with dir-890l
Post by: FurryNutz on August 28, 2017, 08:01:15 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


What a factory reset performed after applying the FW then set up from scratch?

Internet Service Provider and Modem Configurations

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Be sure to log into the Admin account on the router.

. Try manually inputting ISP speed values and test.

>WAN and LAN Connection Rates and ISP Speeds FAQ (http://forums.dlink.com/index.php?topic=63449.0)

What browser are you using while speed testing?