D-Link Forums

The Graveyard - Products No Longer Supported => Routers => DIR-895L => Topic started by: Omniclause on June 11, 2020, 08:53:58 PM

Title: Wireless Devices incapable in connecting to router after devices are asleep
Post by: Omniclause on June 11, 2020, 08:53:58 PM
I am using the DIR 895L and my devices comprises of a windows 10 pro workstation a window 10 home laptop, a window 10 home desktop, an android running android 10, a huawei phone running android 9. All of these device face these problems as written in the subject. However they only disconnect after they are asleep so if the device is not asleep, the router is still connected to the device and devices connected via ethenet do not seem to have this problem which lead me to think that its the router's wireless capabilities having issues. I moved the router everywhere and even though everytime I turn if off and on and it works, the devices will still have a problem connecting after it is disconnected from the router. [/li][/list]

I thought maybe it was my ISP being a problem but i realized it was not as my ISP; Singtel's optical network terminal is functioning properly.
I went into the http://192.168.0.1/ and sometimes, it will take awhile for cable status, network status to turn from disconnected to connected and also for the internet gui to be shown with a tick. Sometimes, accessing http://192.168.0.1/ might allow the disconnected device to connect but over time the problem will still persist, and sometimes accessing http://192.168.0.1/ will not allow the disconnected device to connect.

I tried factory reset and I am using the 1.21 firmware and also the hardware version is A4

Attached are the system logs when i attempt to connect a device to the router but it failed(first picture) and when it kind of works(second picture)
https://drive.google.com/file/d/1_lUOzwlLekiEy9cOSCw9zHz0v6MfTZLN/view?usp=sharing
https://drive.google.com/file/d/1NJvJiZXcLBHjSVqBGXiBDzGIkzTgWcH0/view?usp=sharing


So sorry for the long text