D-Link Forums

D-Link Network Storage => DNS ShareCenter Series => Topic started by: jtma67 on January 28, 2018, 10:49:10 PM

Title: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: jtma67 on January 28, 2018, 10:49:10 PM
After Windows 10 performed an update, I couldn't map my DNS-323 NAS drive.  Bottom line, here is what I found.  The Windows 10 update apparently reset one of the security settings required.  The following security check box MUST be CHECKED.

Go to: Control Panel / Programs and Features / Turn Windows features on or off

Insure the box is CHECKED for   SMB 1.0/CIFS File Sharing Support.  This older drive needs this box CHECKED.

I hope this helps out with your older legacy product NAS product.



Title: Re: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: FurryNutz on January 29, 2018, 09:04:04 AM
Thank you for this information. Hope this helps future Windows 10 users.

Title: Re: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: taemo on March 29, 2018, 07:24:18 AM
this is temporarily useful but any chance to release a firmware that makes the DNS-323 SMBv2 compatible?

Microsoft deprecated SMBv1 in 2014
Title: Re: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: GreenBay42 on March 29, 2018, 07:26:51 AM
No chance unfortunately for a new firmware since the DNS-323 was discontinued 5 years ago.
Title: Re: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: FurryNutz on March 29, 2018, 08:42:52 AM
The suggestion would also not be temporary. Once enabled on Windows, it's enabled until you disable it. Or if maybe a windows update changes it.  ::)
Title: Re: DNS-323 Cant Map Drive after Windows 10 Pro update 1/16/2018
Post by: FurryNutz on June 27, 2018, 08:44:10 AM
Looks like MS is caving in and finally fixing Windows 10 and SMBv1:
https://www.theregister.co.uk/2018/06/27/windows_10_path_chrome_smb1_patch/ (https://www.theregister.co.uk/2018/06/27/windows_10_path_chrome_smb1_patch/)