D-Link Forums

D-Link IP Cameras for Home => DCS-5020L => Topic started by: berthagomez on December 09, 2017, 05:24:52 PM

Title: DCS-5020L - reset does nothing
Post by: berthagomez on December 09, 2017, 05:24:52 PM
Hello all you smart cookies! I'm hoping you might be able to share some wisdom and help me out.

I have a DCS 5020L that was working great at my previous home, but I have moved and want to set it up at my new place. The LED is solid red and a factory reset does nothing. When I use a pin to press in the button in the little hole, absolutely nothing happens. The LED doesn't even flicker. I can hear the little button click, and I hold it down for 10 seconds. Nothing. Hold it down for up to a minute. Still nothing.

Is there anything else I can try?
Title: Re: DCS-5020L - reset does nothing
Post by: FurryNutz on December 14, 2017, 11:55:53 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)


What Mfr and model is the main host router?
What wireless modes are you using?
Title: Re: DCS-5020L - reset does nothing
Post by: cmontyburns on December 16, 2017, 12:09:05 PM
Hello all you smart cookies! I'm hoping you might be able to share some wisdom and help me out.

I have a DCS 5020L that was working great at my previous home, but I have moved and want to set it up at my new place. The LED is solid red and a factory reset does nothing. When I use a pin to press in the button in the little hole, absolutely nothing happens. The LED doesn't even flicker. I can hear the little button click, and I hold it down for 10 seconds. Nothing. Hold it down for up to a minute. Still nothing.

Is there anything else I can try?

Connect it to your router with an Ethernet cable and then see if you can access the admin interface in your web browser.