D-Link Forums

D-Link VPN Router => DSR-250 => Topic started by: landru on August 09, 2017, 06:20:09 AM

Title: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: landru on August 09, 2017, 06:20:09 AM
Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Select Multiple Ports. LEAVE SOURCE PORTS BLANK.
4. Enter the source WAN port numbers separated by a comma if using multiple ports into the DESTINATION PORTS
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty


Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: FurryNutz on August 22, 2017, 11:03:53 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

Thank for this information, hope it helps future users.  ;)
Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: fronquillo1975 on January 16, 2018, 04:27:53 PM
Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Leave Source Start Port and Source Finish Port BLANK
4. Enter the port number(s) or port ranges into the Destination Start Port and Destination Finish Port fields
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty
Excellent information!!!! Very useful for me at this time!!!
Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: FurryNutz on January 16, 2018, 05:05:47 PM
Glad it works for you. Thanks for your feed back. Please feel free to post again.

Enjoy.

Have experience with many firewall, routers. Here is a HOW TO for quick port forwarding:

1. Create a new custom service...
Main Menu > Security > Custom Service > Add a New Custom Service

2. Give it a name, select the link type (TCP, UDP, BOTH (TCP+UDP), or others
3. Leave Source Start Port and Source Finish Port BLANK
4. Enter the port number(s) or port ranges into the Destination Start Port and Destination Finish Port fields
5. Click SAVE
7. Create a new firewall rule
Main Menu > Security > Firewall Rules > Add New IPv4 Firewall Rule
8. From Zone  - Insecure WAN
9. To Zone - Secure LAN
10. Service (select the name of your created custom service)
11. Change Action to Always Allow
12. Source = ANY
13. Log = Never
14. Internal IP Address = (IP address of server/pc/device you are trying to forward to)
15. Click SAVE

DONE - Quick and Dirty
Excellent information!!!! Very useful for me at this time!!!
Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: biroplast on July 20, 2018, 05:13:02 AM
this does not work for three different computers with different ports.

How is the setup for a three computers and thre different ports.

1.pc port 4xxx
2.pc port 1xxx
3.pc port 2xxx

Help please
Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: johnjces on January 08, 2019, 10:11:09 AM
In firmware 3.11_WW dated 10/15/18, the following cannot be done:

3. Leave Source Start Port and Source Finish Port BLANK

If you try and save the service it won't let you until you fill it in.

SO... does not appear to work in 2019.

John
Title: Re: How To Setup Port Forwarding on Firmware 3.11 WAN to LAN device or server
Post by: FurryNutz on January 08, 2019, 02:28:36 PM
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information (http://forums.dlink.com/index.php?board=635.0)
We find that phone contact has better immediate results over using email.
Let us know how it goes please.