D-Link Forums

The Graveyard - Products No Longer Supported => Routers => DIR-850L => Topic started by: eugenlili on November 22, 2016, 02:38:04 AM

Title: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: eugenlili on November 22, 2016, 02:38:04 AM
   
Hi!
I installed today the latest firmware 2.07(from 2.06) and router not working
power button flashes in yellow.
what to do?
Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: FurryNutz on November 22, 2016, 06:38:46 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


Please review this for doing any FW updates: Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

Try this if you can't get to the routers web page with a wired LAN PC:
Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)

Let us know how it goes...
Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: eugenlili on November 22, 2016, 08:46:25 AM
I fail to connect to router.
region - Romania
connection - wired
i did so:I use opera. I entered the router settings and I saw that is firmware update.-update- everything is okay- succes - automatic restart- and .. not working, blinking the power button.
I can not connect to router.
I followed these steps: Power down the router and unplug the power cord.Press and hold the reset button on the rear of the router for 3 to 5 seconds and re-plug the power cord without releasing the reset button.Continue to hold the reset button until the amber power light keeps blinking on and off.
the power button stil blinking.
Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: FurryNutz on November 22, 2016, 08:48:35 AM
Should be blinking I think. Can you connect to 192.168.0.1 if you set a static IP address on your PC to 192.168.0.49?
Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: eugenlili on November 22, 2016, 01:37:37 PM

I entered, but where do I get firmware image because I did not backup
Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: FurryNutz on November 22, 2016, 01:46:23 PM
You have to download the FW file, either v2.06 or v2.07 from your regional support site and unpack the .zip file and use the .bin file to send to the printer when you see the recovery page. Follow the Recovery FAQ process. Use IE or FF. DO NOT USE CHROME!

Title: Re: I installed today the latest firmware 2.07(from 2.06) and router not working
Post by: eugenlili on November 22, 2016, 05:04:11 PM
i used IE

I downloaded version 2.07 and after 2 uploads,  finally work

thanks FurryNutz
Title: Re: I installed today the latest firmware 2.07(from 2.06) (RESOLVED)
Post by: FurryNutz on November 22, 2016, 05:05:20 PM
Glad you got it working.
Enjoy.  ;)