D-Link Forums

The Graveyard - Products No Longer Supported => Routers => DIR-813 => Topic started by: sazbad on June 04, 2016, 04:56:06 PM

Title: Port forwarding not working
Post by: sazbad on June 04, 2016, 04:56:06 PM
I have been trying to make the port forwarding working on this router for a while and now i am out of luck.

I am trying to forward a port of my ip camera and it does not seem to work. This is my current settings.

1) My ip camera is running it http://192.168.0.107:49832/. The ip is taken via DHCP of the router.
2) I went to port forwarding of my router and add the 192.168.0.107 in ip and 49832 in the range of input-outputs.
3) I have used a port checker tool and it shows that the connection is open but when I use the public ip and port in the browser it says "The site can't be reached"
4) To rule out the problem of my camera, i then installed a ftp server at 192.168.100:88 on my laptop. 
5) I then used the port forwarding in the D-link router the same way to forward the port.
6) I again then use port checker tool and it shows the port is not reachable this time.


I am not sure what else to try at this point. Any suggestion is appreciated.

Title: Re: Port forwarding not working
Post by: RYAT3 on June 04, 2016, 08:00:41 PM
There might be restrictions on forwarding port 49,000+.

Try something less... like 8085 as a test, or your 88 that you used.



Title: Re: Port forwarding not working
Post by: FurryNutz on June 07, 2016, 07:10:05 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


Internet Service Provider and Modem Configurations

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

I have been trying to make the port forwarding working on this router for a while and now i am out of luck.

I am trying to forward a port of my ip camera and it does not seem to work. This is my current settings.

1) My ip camera is running it http://192.168.0.107:49832/. The ip is taken via DHCP of the router.
2) I went to port forwarding of my router and add the 192.168.0.107 in ip and 49832 in the range of input-outputs.
3) I have used a port checker tool and it shows that the connection is open but when I use the public ip and port in the browser it says "The site can't be reached"
4) To rule out the problem of my camera, i then installed a ftp server at 192.168.100:88 on my laptop. 
5) I then used the port forwarding in the D-link router the same way to forward the port.
6) I again then use port checker tool and it shows the port is not reachable this time.


I am not sure what else to try at this point. Any suggestion is appreciated.