D-Link Forums

The Graveyard - Products No Longer Supported => Routers => DIR-880L => Topic started by: drawie on June 07, 2014, 12:39:55 PM

Title: Scheduling...(HOW TO)
Post by: drawie on June 07, 2014, 12:39:55 PM
In the "schedule" page it is written that you can controle the access to the internet  for a specific device during a specified time periods. How is this done? ???javascript:void(0);
Title: Re: Scheduling...
Post by: FurryNutz on June 17, 2014, 08:46:03 AM
I think it might, however I'd have to check on that...I didn't get a good look at it as I've loaned mine out to my friend who's testing it out with multiple xbox consoles.  ;D
Title: Re: Scheduling...
Post by: fredde on June 20, 2014, 01:12:38 PM
drawie,

Did you solve this?

I wish scheduling was implemented from the Home tab -> Connected Clients -> Pencil, but there is just allowed or blocked.

It can be done from Firewall -> IPv4 but it's not really user friendly...

Make sure the client have Reserved IP frome Home tab. Enter this IP into the rule as Source, for example 192.168.0.2-192.168.0.2, and destination 0.0.0.0-255.255.255.255, and port range 1-65535. Set Source at LAN, Destination at WAN and Port Range at Any. And select the schedule that you created under Managment tab -> Schedule.
Title: Re: Scheduling...
Post by: drawie on June 22, 2014, 10:24:15 AM
Fredde thanks for your input. ;D

That's the way it worked for me.
-Check the time of the router and adjust it if necessary (this was my problem) ::)
-Reserve for every client an IP from the Home tab
-Create a schedule: Management tab - Schedule - Add Rule
-Create a IPv4 Rule: Feature tab - Firewall - IPv4 Rules -Add Rule
For example Source 192.168.0.2-192.168.0.2, and destination 0.0.0.0-255.255.255.255, and port range 1-65535.
Set Source at LAN, Destination at WAN and Port Range at Any. And select the schedule that you created under Management tab -> Schedule.
Importend:Select in the drop down Rule list ALLOW or DENY for the created rule.

Title: Re: Scheduling...(HOW TO)
Post by: FurryNutz on June 22, 2014, 10:25:42 AM
Glad this is working for you. Thanks for sharing the set up info.

This will come in handy for future users.

Enjoy.  ;)
Title: Re: Scheduling...
Post by: fredde on June 28, 2014, 11:35:31 AM
I wish scheduling was implemented from the Home tab -> Connected Clients -> Pencil, but there is just allowed or blocked.

This is now how it works in 1.01. Much better.
Title: Re: Scheduling...(HOW TO)
Post by: FurryNutz on June 28, 2014, 03:14:04 PM
Glad it's working better now. 2 items we can mark off as fixed.
Title: Re: Scheduling...(HOW TO)
Post by: FurryNutz on July 01, 2014, 07:59:34 AM
http://forums.dlink.com/index.php?topic=59905.0 (http://forums.dlink.com/index.php?topic=59905.0)