D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => DGS-1216T => Topic started by: stuk on February 03, 2014, 06:31:24 AM

Title: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 03, 2014, 06:31:24 AM
Hi,
I've buy DGS-1210-48 with version 4.00.026, i want upgrade firmware to V4.10.023, i go to Tool->firmware backup and upgrade i select DGS-1210-48_D1_Run_v4.10.023.had file and click on Upgrade.
I get two pop up, click yes but after i get a 'Page not found' and i can't upgrade a firmware!
How can i solve?

PS: every time switch reboot its lost the static ip that I've set and reset to 10.90.90.90 why?

Thanks everybody
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 03, 2014, 08:13:23 AM
I try web,telnet, nothing to do. If i try upload old firmare 4.00.026 upload is fine. But last 4.10.023 i can't upload. Why?
Thanks
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: FurryNutz on February 03, 2014, 09:26:47 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)



3rd Party Security Software Configurations


Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 03, 2014, 11:42:27 PM
Hi, i'm in Italy.
I tried Ie 11, last chrome, and last firefox.

Any idea?
Thanks
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: FurryNutz on February 04, 2014, 08:45:15 AM
It you've had not success with those, I recommend that you phone contact your regional D-Link support office and ask them about this and see if the update is needed to be sure.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 04, 2014, 08:59:51 AM
Ok, but enable ipv6 support, its a good update. Are you sure its ok upgrade firmare and not have know issue?
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: FurryNutz on February 04, 2014, 09:21:15 AM
Why you need to contact D-Link support and ask them about this problem of going from one to the next.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 04, 2014, 11:53:52 PM
Ok, thanks.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: Jeco92 on February 10, 2014, 12:40:17 AM
I have a DGS-1210-24 with firmware 4.00.026 I would like to upgrade to 4.1

I have exactly the same problem with firmware upgrade. I tried using TFTP, IE11, Firefox and Chrome (with your settings) whithout success.

I asked dlink support team in France whithout success also.

So what can I do next ?

I tried from a Windows 7 64bits PC and from a Windows 7 32bits PC, all French.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 10, 2014, 12:42:02 AM
This is solution for me, there's a pre-step for upgrade:

1) Upgrade with this ftp://ftp.dlink.eu/Products/dgs/dgs-1210-48/driver_software/dgs-1210-48_d1_medium%20fw_v4.10.000(44801802)(0719173839).had
2) Upgrade with last firmware
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: stuk on February 10, 2014, 12:43:33 AM
for 24 i think is this:
ftp://ftp.dlink.eu/Products/dgs/dgs-1210-24/driver_software/dgs-1210-24_d1_medium%20fw_v4.10.000(44801799)(0719093153).had
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: Jeco92 on February 10, 2014, 12:59:26 AM
Thank you very much, it works great after rebooting the device between and after firmware upgrade.

I owe you one...

Title: Re: DGS-1210-48 Upgrade Firmware
Post by: aseques on March 03, 2014, 06:39:02 AM
Thanks a lot for these, there's no mention of the intermediate step in the site, and already wasted a ton of time with this (tfpt, different browsers, different OS, ..)
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: Fabz on August 14, 2014, 01:02:09 PM
Hi there :)

I try to upgrade a DGS-1210-10P without success. Web browser don't work but I used SmartConsole Utility (http://www.dlink.com/uk/en/support/product/dgs-1210-series-gigabit-smart-plus-switches?revision=deu_revb)

I hope this thing help
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: AmiGaGa on April 21, 2016, 11:52:40 AM
Thanks stuk

i was trying for hours with some differents dlink ftp, website, forums, with telnet and tftp (it said invalid firmware).
It's a shame that dlink not mention it.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: FurryNutz on April 21, 2016, 12:29:55 PM
Thanks for the feed back and sharing your information. Hope this helps future users.

Enjoy.  ;)
Thanks stuk

i was trying for hours with some differents dlink ftp, website, forums, with telnet and tftp (it said invalid firmware).
It's a shame that dlink not mention it.
Title: Re: DGS-1210-48 Upgrade Firmware
Post by: FurryNutz on November 29, 2016, 01:30:58 PM
FYI, D-Link posted new FW for the DGS-1210-10,10P,20 and 28 model switches today 11.29.2016.

Users are encouraged to go here and type in the DGS-1210-## model number you have and find the new FW:
http://support.dlink.com/index.aspx (http://support.dlink.com/index.aspx)

Nothing as of yet for the -48 model.