D-Link Forums

D-Link IP Cameras for Home => DCS-825L => Topic started by: francorg on January 28, 2014, 02:31:46 AM

Title: DCS-825L Web Pages: config and remote view
Post by: francorg on January 28, 2014, 02:31:46 AM
I found the following configuration web pages on my DCS-825L.
To access them you have to use:
user = admin
password = the password of your webcam, usually configured during first time setup wizard

1. http://ip_address/eng/liveView.cgi or http://ip_address/eng/mainFrame.cgi
Here you can access the typical DLink web config page with several sections:
- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)
- a setup page where you can config the wireless lan setup and also access to the SD storage
- a maintenance page where to upgrade the firmware
- a status page with the typical info (ip address, mac address, etc.)
- a help page containing some disclaimers

2. http://ip_address/eng/admin/
here you can access two configs:
- internet connection wizard or manual setup
- motion detection wizard or manual setup this one doesn't work as I cannot enable the CamCliCtrl plugin, as explained in point 1. above

3. http://ip_address/image/jpeg.cgi
here you get a screenshot of the actual webcam view

4. http://ip_address/video/mjpg.cgi
here you get a live stream of your webcam. To access I use VLC player, by opening a Network Stream and putting in the url above.

I succeeded also in forwarding a port on my firewall in order to have direct access to the url above also when I am not at home by pointing to the public ip address of my home internet connection.

I think that every URL above it's also accessible through https protocol on standard port 443.


For the moment this is all I discovered.
If you have further info please contribute to this post.

Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: bhillou on January 28, 2014, 05:10:36 AM
Very nice ! The mainFrame.cgi seems to be the usual DLink Web interface but it is missing some of the settings that are available in the other screens. Hopefully this is because they are working on integrating them and it will be announced in a later firmware ?
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on January 30, 2014, 09:30:24 PM

- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)

Roberto

hi francorg,

I find this file but its also not working for me, maybe its a to old version. >:(

InstallCamCliCtrl.msi (http://www.mediafire.com/download/mo57ei32kt139b4/InstallCamCliCtrl.rar)

rose05
Title: Re: DCS-825L Web Pages: config and remote view
Post by: pri77y on February 15, 2014, 05:43:46 AM
CamCliCtrl not working for me either....
Title: Re: DCS-825L Web Pages: config and remote view
Post by: DavidAu on March 07, 2014, 10:23:06 PM
Thanks Francorg, I'm experiencing the same issue with the NCS plugin in all browsers.. Hope a future firmware release might fix it.

Some additional useful URLs:
5. rtsp://admin:passwd@ipaddr:554/play1.sdp ~ 720p 25fps
6. rtsp://admin:passwd@ipaddr:554/play2.sdp ~ 360p 10fps
7. rtsp://admin:passwd@ipaddr:554/play3.sdp ~ 360p 10fps
These are available to view an ffMPEG live stream with audio using RTSP (http://en.wikipedia.org/wiki/Real_Time_Streaming_Protocol) (H.264/MPEG4 (http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC) encoding).
Achieved successful playback of these streams over TCP or UDP using various methods:

Advanced URLs:
8. http://ipaddr/cgi/admin/tools_admin.cgi
Returns XML of config settings (incl. your admin password in plaintext!) - seems there will be scope to enable multiple users in future.

9. http://ipaddr/cgi/admin/telnetd.cgi?command=on
Does anyone know the login/password to login to the Linux Telnet console (e.g. using PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty/)) after running this command in your browser?
Title: Re: DCS-825L Web Pages: config and remote view
Post by: CF76 on March 19, 2014, 08:56:08 AM
Hi guys, I just bought a 933L and 825L.
I made some experiment with 825L.
I'm using IP Cam for live view and searching with it the 825L is founded like DCS 1130.
In this 3d http://forums.dlink.com/index.php?topic=50579.0 I test the DCS 1130 emulator looking the url.
for example:
http://support.dlink.com/emulators/dcs1130/recorder.html
In my network i change with the ip address and html with cgi and it works:
ipaddr/recorder.cgi

fod ddns adv_ddns.html became ipaddr/adv_ddns.cgi

I hope that can help.

Bye

(sorry for my english)
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on March 22, 2014, 09:11:27 AM
Thank you CF76!

Great discovery!!

On my webcam it works by using this type of url: http://ip_address/eng/admin/recorder.cgi

Roberto

Title: Re: DCS-825L Web Pages: config and remote view
Post by: babymaker on April 03, 2014, 05:30:19 PM
A couple more pages I have found:

http://ipaddr/eng/admin/support_tools.cgi
- List of possible settings and what they mean? No selectable settings though..

http://ipaddr/eng/admin/tools_admin.cgi - Change admiin password, add user accounts, authentication, device settings (on screen display, turn led on, off, flicker?)

http://ipaddr/eng/admin/tools_system.cgi
- Time configuration, automatic time configuration, set time manually. (Note this is what set me down this path of looking for pages as my time was always incorrect no matter if I selected synchronize in the app. Thie issue was because the setting in here was setting the time to automatically use a dlink server?!) Unchecked automatic synch, selected my timezione, and clicked save and it took about a minute for the settings to be saved to my camera... it works!

http://ipaddr/eng/admin/st_log.cgi - xml info? under construction?

http://ipaddr/eng/admin/adv_lan.cgi
- Port Settings, Port Forwarding

http://ipaddr/eng/admin/adv_wireless.cgi
- Enable AP Client?

http://ipaddr/eng/admin/adv_image.cgi
- Shows a live video stream with image settings!

http://ipaddr/eng/admin/adv_snapshot_cont.cgi
- Snapshot (email snapshots on motion detection?)

http://ipaddr/eng/admin/tools_default.cgi - save to local hard drive, factory reset, reboot








Title: Re: DCS-825L Web Pages: config and remote view
Post by: ferdu-42 on April 03, 2014, 08:47:03 PM
Hi everybody!

One more page I have found:

http://ipaddr/eng/admin/adv_record.cgi

Why D-link doesn't make a single page for the configuration of this camera, aka "http://ipaddr".
And the iPhone/iPad app is so slughish, D-link needs to redesign this ios app.
Funny is, i just love this camera, and i use it for monitoring my cats! But it needs more and more improvements.....
 
Title: Re: DCS-825L Web Pages: config and remote view
Post by: CF76 on April 07, 2014, 08:16:06 AM
one more page:

ipaddr/eng/admin/support_men.cgi

is the help page, see the Music Player menu!!! you can upload your own music.

We MUST find this page.

bye
Title: Re: DCS-825L Web Pages: config and remote view
Post by: ferdu-42 on April 07, 2014, 11:23:50 AM
Hi! Everybody...
I corrected my last post!
I still can't upload musics to the SD card? Even using the http://ipaddr/eng/admin/support_men.cgi
I never see a option to upload musics to the SD.
Someone help me!
Thanks...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 09, 2014, 10:13:41 AM
Once you enable the telnet options with...

http://192.168.0.11/cgi/admin/telnetd.cgi?command=on

You can login to the system with

U/N : root
P/W : admin
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on April 09, 2014, 10:36:47 PM
Once you enable the telnet options with...

http://192.168.0.11/cgi/admin/telnetd.cgi?command=on

You can login to the system with

U/N : root
P/W : admin

It doesn't work on mine with the latest firmware.
Does it work for you? Can you send a dir command and retrieve all the cgi file names?

Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 10, 2014, 10:40:59 PM
Hi Roberto,
I haven't upgraded to the newer firmware just yet.
Here is what I get when I request 'help' with telnet.

BusyBox v1.20.2 (2013-09-24 23:39:31 MAGT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# help
Built-in commands:
------------------
        . : alias bg break cd chdir continue echo eval exec exit export
        false fg hash help jobs kill let local printf pwd read readonly
        return set shift times trap true type ulimit umask unalias unset
        wait

#
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on April 11, 2014, 02:09:52 AM
If you send the command "ls" (LS lowercase without quotes) does it return the file list?

Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 11, 2014, 03:34:44 AM
BusyBox v1.20.2 (2013-09-24 23:39:31 MAGT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# ls
bin      dvr      init     mnt      proc     starkit  tmp      var
dev      etc      lib      opt      sbin     sys      usr

Dont know which folder the cgi files would be located in...
Not great on TELNET :(
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 11, 2014, 03:40:16 AM
Just done a little bit of playing and googling and found this...
Hope this helps everyone...

If you want more let me know!  ;D

# ls var/www/eng
admin                liveView.cgi         mainFrame.cgi
basic.css            liveView.css         mainFrame.css
frame.lang           liveView.xsl         mainFrame.lang
fullScreen.html      liveView_debug.cgi   mainFrame.xsl
home-left.lang       liveView_debug.xsl   mainFrame_debug.cgi
icons.css            liveview.lang        mainFrame_debug.xsl
images               logout.cgi           music_control.cgi
index.html           logout.lang          setup.css
js                   logout.xsl           web_event.cgi

# ls var/www/eng/admin
adv_apRouter.lang             logout.cgi
adv_apRouter.xsl              logout.lang
adv_audio_detection.cgi       mfg.cgi
adv_audio_detection.lang      motWizard.cgi
adv_audio_detection.xsl       motWizard.lang
adv_audiovideo.cgi            motWizard.xsl
adv_audiovideo.lang           mot_detect.cgi
adv_audiovideo.xsl            mot_detect.lang
adv_ddns.cgi                  mot_detect.xsl
adv_ddns.lang                 music_button.cgi
adv_ddns.xsl                  music_button.lang
adv_do.cgi                    music_button.xsl
adv_do.lang                   netWizard.cgi
adv_do.xsl                    netWizard.lang
adv_firewall.cgi              netWizard.xsl
adv_firewall.lang             night_led.cgi
adv_firewall.xsl              night_led.lang
adv_godev.cgi                 night_led.xsl
adv_https.cgi                 pppoe_status.cgi
adv_https.lang                product_registration.cgi
adv_https.xsl                 reboot.cgi
adv_image.cgi                 recorder.cgi
adv_image.lang                reset.cgi
adv_image.xsl                 rs485.lang
adv_lan.cgi                   schedule_profile_manager.cgi
adv_network.lang              sdcard
adv_network.xsl               siteSurvey.cgi
adv_privacy_mask.cgi          st_device.cgi
adv_record.cgi                st_device.lang
adv_recording.lang            st_device.xsl
adv_recording.xsl             st_log.cgi
adv_sdcard.cgi                status-left.lang
adv_sdcard.lang               support-left.lang
adv_sdcard.xsl                support_ack.cgi
adv_snapshot.cgi              support_ack.lang
adv_snapshot.lang             support_ack.xsl
adv_snapshot.xsl              support_acknowledge.xsl
adv_snapshot_cont.cgi         support_adv.cgi
adv_videoclip.cgi             support_adv.lang
adv_videoclip.lang            support_adv.xsl
adv_videoclip.xsl             support_home.cgi
adv_wireless.cgi              support_home.lang
adv_wireless.lang             support_home.xsl
adv_wireless.xsl              support_men.cgi
adv_wizard.cgi                support_men.lang
adv_wizard.lang               support_men.xsl
adv_wizard.xsl                support_status.cgi
advanced-left.lang            support_status.lang
alarm_out_action.cgi          support_status.xsl
apSiteSurvey.cgi              support_tools.cgi
ap_client.cgi                 support_tools.lang
ap_router.cgi                 support_tools.xsl
audio_player.cgi              telnetd.cgi
audio_player.lang             test_ftp_status.cgi
audio_player.xsl              test_mail_status.cgi
calibration.cgi               thermal_detection.cgi
cam_control.lang              thermal_detection.lang
cam_control.xsl               thermal_detection.xsl
cam_patrol_control.lang       tools-left.lang
cam_patrol_control.xsl        tools_admin.cgi
cert_create.cgi               tools_admin.lang
cert_create_request.cgi       tools_admin.xsl
cert_property.cgi             tools_default.cgi
cert_property.lang            tools_default.lang
cert_property.xsl             tools_default.xsl
cert_remove.cgi               tools_firmware.cgi
cert_request_info.cgi         tools_firmware.lang
cert_upload.cgi               tools_firmware.xsl
cloudLink.cgi                 tools_leveloftrust.cgi
cloudStatus.cgi               tools_system.cgi
config.lang                   tools_system.lang
ddns_status.cgi               tools_system.xsl
export.cgi                    tvaview.xsl
export_log.cgi                tvjview.xsl
factoryUpdate.cgi             update.cgi
forceUpdate.cgi               update_status.cgi
frame.lang                    uploadAudio.cgi
getSDFile.cgi                 web_log.cgi
go_sleep.cgi                  web_log.lang
import.cgi                    web_log.xsl
index.cgi                     wireless_ate.cgi
loadfile.cgi

Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 11, 2014, 03:42:38 AM
here is the url for music playing...

http://ipadd/eng/admin/music_button.cgi
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 11, 2014, 04:00:09 AM
This is also replated to playing your own audio files...

http://ipadd/eng/admin/audio_player.cgi
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 11, 2014, 04:30:10 AM
Here is the page that will list most of the features that everyone will be looking for...

http://ipaddr/eng/liveView_debug.cgi
Title: Re: DCS-825L Web Pages: config and remote view
Post by: ferdu-42 on April 11, 2014, 08:04:25 PM
I love more and more this camera, Many thanks, friggingreat.....
p.s ( I can't use the botons #1....#5, to play the uploaded musics, they have to be .mp3, but is there a max bit rate?)
Best regards,
Title: Re: DCS-825L Web Pages: config and remote view
Post by: friggingreat on April 12, 2014, 01:35:13 AM
Upload the files on the audio player page and when you go to the music player page select SD card music and save, this will now be the default music when you press the music note on the camera.
Alternatly you can play the individual files once you have uploaded them on the audio player page.
As for the MP3 files it gives a warning if the file has space's in and I have been using high quality MP3's 320kbps.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: ferdu-42 on April 12, 2014, 09:27:59 AM
Many thanks, friggingreat.....
Still no sucess.
First i upload with sucess my musics.
Then, the problem, on the "music player" page i save the "sd card" option (to use my musics on the SD), and then when i go to the "audio player" page there are only 5 music listed and when i press the play button, i listen to the lulaby music.
More curious is, on that same page, if i press the "01.mp3" music, it tryes to download, and indeed that's the music i uploaded, not the lulaby.
Then when i return to the "music player" page it's not the "sd card" selected but the "system music" selected, so this page is not saving properly. Oh well i will wait for the next firmware (i am using the most recente), maybe ti's fixed. sorry for my bad English.
Best Regards,
Ferdu-42
Title: Re: DCS-825L Web Pages: config and remote view
Post by: ttw17 on April 15, 2014, 02:01:45 AM
After i set the Static IP Address and Port Forwarding, the d'link cloud services is disabled
someone know how can i have the d'link cloud services and Static IP Address +port forwarding in the same time?
any one can help me?
Thank thanks~
Title: Re: DCS-825L Web Pages: config and remote view
Post by: veerman on May 16, 2014, 04:43:32 PM
I just did a recursive directory listing using telnet on the camera (1.03) to fetch all files. I have created a more complete list of files that can be executed with a browser. Hopefully there is something useful here that hasn't been noticed yet. Here's a link:

http://veerman.ca/other/dlink/ (http://veerman.ca/other/dlink/)

Edit: I made a simple script that takes your IP and will auto-generate links for faster testing.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on May 17, 2014, 12:06:50 AM
I just did a recursive directory listing using telnet on the camera (1.03) to fetch all files. I have created a more complete list of files that can be executed with a browser. Hopefully there is something useful here that hasn't been noticed yet. Here's a link:

http://veerman.ca/other/dlink/ (http://veerman.ca/other/dlink/)

Edit: I made a simple script that takes your IP and will auto-generate links for faster testing.

Great!

Thank you,
Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: vaxilein on May 20, 2014, 01:33:38 PM
After i set the Static IP Address and Port Forwarding, the d'link cloud services is disabled
someone know how can i have the d'link cloud services and Static IP Address +port forwarding in the same time?
any one can help me?
Thank thanks~


In network settings you might have forgotten to manually define a DNS server and because of this the camera can't resolve the hostname to the IP address. Do that and it will work again. Good luck.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: jabadakkas on June 05, 2014, 01:12:16 AM
It doesn't work on mine with the latest firmware.
Does it work for you? Can you send a dir command and retrieve all the cgi file names?

Roberto


I just upgraded to 1.03. You can log in to the DCS-825L with root and the admin password you have set with the install wizard.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: bnuff on June 27, 2014, 06:30:47 AM
Many thanks, friggingreat.....
Still no sucess.
First i upload with sucess my musics.
Then, the problem, on the "music player" page i save the "sd card" option (to use my musics on the SD), and then when i go to the "audio player" page there are only 5 music listed and when i press the play button, i listen to the lulaby music.
More curious is, on that same page, if i press the "01.mp3" music, it tryes to download, and indeed that's the music i uploaded, not the lulaby.
Then when i return to the "music player" page it's not the "sd card" selected but the "system music" selected, so this page is not saving properly. Oh well i will wait for the next firmware (i am using the most recente), maybe ti's fixed. sorry for my bad English.
Best Regards,
Ferdu-42

I am having similar issues to you but slightly different.  I can upload a mp3 file and it does go into the music folder on the sd card.  I have used short file names i.e. 06.mp3, 07.mp3.  If I use 05.mp3 I get the same issue as you had in that download of the file from ipaddr/eng/admin/audio_player.cgi gives me the one I uploaded but play gives me the original melody!  Odd but it looks like the download url is always music/xx.mp3 so it picks the file from the sdcard folder rather than the built in file. 

If I use this page
ipaddr/eng/admin/music_button.cgi?folderpath=&command=1&getSystemMusic=1&filesPerPage=5 and click on the SDCard music/ link I can pick a single track from the sd card to play when I press the music button on the camera itself.  This works at least.    If I go to ipaddr/music/sdcard_play.cgi I can force the play of the track assigned to the button from the browser as if I had pressed the physical button on the device.

If I modify the audio player url to
ipaddr/eng/admin/audio_player.cgi?folderpath=music&command=video&getSystemMusic=0&filesPerPage=5
I can see the files that I want to be able to play in the player screen but the play button does not work (delete does though).  It looks like the javascript is not fully in place yet to cope with the folder structure.  The function doThings(type, value) gets passed the action i.e. play and the filename but no folder name.

      case 'play':
         //alert("play music = "+value);
         command = "play";
         $("#folderName").val(value);
         //folderpath = value;//need change
         break;

sorry not fully conversant with javascript so can't get any further with this but looks like developers have put a remark in to say they need to do something to be able to cope with folders (possibly?).
Title: Re: DCS-825L Web Pages: config and remote view
Post by: neo82ita on July 03, 2014, 08:53:29 AM
Hi, i am new to the forum, i have a questin.
In the various menus, is there a way to disable the startup sound?
I have not found.
Thank
Title: Re: DCS-825L Web Pages: config and remote view
Post by: gvascon1 on July 05, 2014, 07:28:02 PM
Many thanks for all information provided.. but I still need help to make the player works with SDCard music.

I already tired all the options described but without success. Basically, I can see the mp3 file (e.g 07.mp3) but  no able to play.

Appreciate if somebody could provide more details about how make it works.

Title: Re: DCS-825L Web Pages: config and remote view
Post by: bribri007 on August 11, 2014, 06:13:03 PM
@gvascon1

Can you try to play your music through this screen:

http://ip_addr/eng/mainFrame_debug.cgi?nav=Setup#

Go there and check the Music Button menu item

I'm on the latest firmware and it works through this menu.  I had to click Music/ next to SD Card.  From there I was displayed a list of my .mp3s. I clicked save settings, and now my mp3s play and not the default lullabies.

Title: Re: DCS-825L Web Pages: config and remote view
Post by: fastie81 on August 19, 2014, 06:05:08 PM
Hi Guys

Anyone know if the motion detection is configurable?
I am trying to get the motion detection to send an event to my web server.
And then other question is the Temp Sensor, is there a URL I can get this?

Sorry I just got it yesterday, still finding out things..
Chris
Title: Re: DCS-825L Web Pages: config and remote view
Post by: JenselBensel on August 28, 2014, 12:11:09 PM
Hi guys.

I need some help with a livestream on raspbmc.

Is there someone who knows how i can use raspbmc with the rtps-link?
Title: Re: DCS-825L Web Pages: config and remote view
Post by: Spaldo on September 16, 2014, 12:56:14 AM
Anyone worked out how to install the NCS plugin in 1.04 and get the live view working via http://192.168.1.10/eng/liveView.cgi
Title: Re: DCS-825L Web Pages: config and remote view
Post by: JBilderbeek on November 10, 2014, 06:31:16 AM
Every time I put the camera off and back on again the time had been reset.
In the setup I tried all kinds of settings (syncing and manually) but it seems that the time setting is erased when you put the camera off.
Pretty annoying...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on November 12, 2014, 09:57:39 AM
What FW version is currently loaded?

What region are you located?



Every time I put the camera off and back on again the time had been reset.
In the setup I tried all kinds of settings (syncing and manually) but it seems that the time setting is erased when you put the camera off.
Pretty annoying...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: JBilderbeek on November 17, 2014, 12:17:45 AM
I have the latest (1.04) Firmware installed.
I'm located in The Netherlands (of course I've set the right TimeZone).

Because of you questions I presume that the problem I have is not normal...

Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on November 17, 2014, 07:52:33 AM
You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.

Let us know if the settings are saved after a power cycle...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: xesc on January 04, 2015, 12:11:15 PM
Hi! Everybody...
I corrected my last post!
I still can't upload musics to the SD card? Even using the http://ipaddr/eng/admin/support_men.cgi
I never see a option to upload musics to the SD.
Someone help me!
Thanks...

Hi all,

To upload music to the SD you need to umonunt the SD first and create a folder called "music" in the SD card (with a computer) and then put at most 5 MP3 named 1.mp3 to 5.mp3

Found the instructions on: ftp://ftp2.dlink.com/PRODUCTS/DCS-825L/REVA/DCS-825L_MP3_LULLABY_INSTALLATION_INSTRUCTIONS.PDF

Hope it helps! Thanks for all the other links! :)
Title: Re: DCS-825L Web Pages: config and remote view
Post by: chilango on March 20, 2015, 11:24:58 AM
on the new software 1.05.02 it seems doesnt have the mainFrame_debug.xsl so you didnt can load the main configuration page
Title: Re: DCS-825L Web Pages: config and remote view
Post by: ebenito on March 27, 2015, 03:14:09 AM
I Have the same problem, when I turn off the babycam and then turn on the date & time are reset (I have this issue with FW ver 1, 2 and 4)

You said "re-load of the FW using a LAN wired connection only"; but how can I do it?; the baby cam DSC-825L haven't an Ethernet connection, only have Wifi.

Therefore I try to reload FW many times, and always date/time are reset.

Any other solution?

Thanks


You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.

Let us know if the settings are saved after a power cycle...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on March 27, 2015, 07:20:37 AM
You might want to try a manual re-load of the FW using the wireless connection. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.

Let us know if the settings are saved after a power cycle...

If this still fails and the problem still continues, then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. You may need to ask for an RMA. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

I Have the same problem, when I turn off the babycam and then turn on the date & time are reset (I have this issue with FW ver 1, 2 and 4)

You said "re-load of the FW using a LAN wired connection only"; but how can I do it?; the baby cam DSC-825L haven't an Ethernet connection, only have Wifi.

Therefore I try to reload FW many times, and always date/time are reset.

Any other solution?

Thanks


You might want to try a manual re-load of the FW using a LAN wired connection only. Do a factory reset, load the FW .bin file you downloaded using IE or FF Only, Do one more factory reset then set up from scratch.

Let us know if the settings are saved after a power cycle...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on May 09, 2015, 11:33:06 PM
main menue with fw1.03 for all settings

(http://fs2.directupload.net/images/150510/sl4h9c4p.jpg)
(http://fs2.directupload.net/images/150510/euom5gyq.jpg)
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on May 10, 2015, 08:52:49 AM
Let us know what happens after reloading FW...
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on May 10, 2015, 07:09:38 PM
with FW 1.04 same Menue
(http://fs2.directupload.net/images/150511/793se3hi.jpg)
(http://fs2.directupload.net/images/150511/82tosy54.jpg)
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on May 10, 2015, 07:19:16 PM
Does the configuration remain after power cycling the camera?
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on May 11, 2015, 02:08:37 PM
hi FurryNutz

here after some power cycling the camera, they lost some of the setting! (Time, ...)
but not the main settings like Network.

(http://fs2.directupload.net/images/150511/awwltjtv.jpg)

Solution for me, I restore my settings.db then are all OK!
(http://fs1.directupload.net/images/150511/8jz26bzn.jpg)

firmware update 1.03 to 1.04
(http://fs1.directupload.net/images/150511/2w4rdje5.jpg)
music uploading
(http://fs2.directupload.net/images/150511/hyirthjh.jpg)
(http://fs2.directupload.net/images/150511/4dhlatlu.jpg)
all OK
(http://fs1.directupload.net/images/150511/56ejvyss.jpg)

Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on May 12, 2015, 07:25:39 AM
Looks like a good work around. You may want to contact your regional D-Link support office and ask about this. Time should be accurate even upon a reboot or power cycle. Ensure you have NTP services selected and enabled for Time. This will help the unit keep accurate time values.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on July 05, 2015, 12:05:53 AM
Just updated to firmware v1.06.06 as suggested by the prompt of the baby monitor iPhone app.
It seems that the liveView_debug.cgi doesn't exist anymore. It still exist liveView.cgi but it has just few options to configure.

Is anyone able to access the root folder of a v1.06 camera and check if then renamed/moved the liveView_debug.cgi file?

Thank you,
Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on July 05, 2015, 04:57:03 AM
Firmware Version
New Features
V1.06.06
1.Update mydlink agent to v2.0.19-b33
2.Add Bonjour_dcamera service and remove Bonjour _http service
3.Support UTF-8 Unicode format for SD card music playback
4.Redefine the recording file naming rule for multi-event recording feature and modify the related NIPCA sdcard_list and recorder CGI

have this days no time to check it and look "able to access the root folder of a v1.06", as soon I have time  .. will post it here
regards
Title: Re: DCS-825L Web Pages: config and remote view
Post by: efmnet on August 31, 2015, 11:58:01 PM
Hi everyone!

Has anybody found a way to access advanced configuration pages on firmware V1.06.06

From booth DCS-825L and DCS-855L dlink has removed this pages

Can i downgrade? where can i find the previous working .bin firmware files. they removed from ftp and website as well.

If anybody has the files please link them here.

Cheers,

Ed
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on September 02, 2015, 10:00:23 PM
Hi everyone!

Has anybody found a way to access advanced configuration pages on firmware V1.06.06

From booth DCS-825L and DCS-855L dlink has removed this pages

Can i downgrade? where can i find the previous working .bin firmware files. they removed from ftp and website as well.

If anybody has the files please link them here.

Cheers,

Ed
1. downgrad possible? : YES
2. firmware to find? : http://tsd.dlink.com.tw/
select "DCS" then "825" and find the one you are looking for fw1.03 or ...

Firmware   Firmware: DCS-825L A1 FW v1.05.04   13.84 MB   .
Firmware   Firmware: DCS-825L A1 FW v1.06   13.85 MB   .
Firmware   Firmware: DCS-825L_A1_FW 1.03-3725   14.02 MB   .
Firmware   Firmware: DCS-825L_A1_FW v1.04-4026   14.03 MB   .
Firmware   Firmware: DCS-825L_A1_FW1.00-3124   13.24 MB   .
Firmware   Firmware: DCS-825L_A1_FW1.01-3327   13.26 MB   .
Firmware   Firmware: DCS-825L_A1_FW1.02-3427   14.01 MB

DCS-825L firmware is available here: http://tsd.dlink.com.tw (http://tsd.dlink.com.tw/)/
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on September 02, 2015, 10:18:11 PM
I tried downgrading to v1.05 but the cgi pages didn't come back...
Please let me know if you succeed and how.

Thank you,
Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on September 03, 2015, 11:29:14 AM
I tried downgrading to v1.05 but the cgi pages didn't come back...
Please let me know if you succeed and how.

Thank you,
Roberto

sorry I dont remember exactly how I have done it, yes I downgrade ones from fw1.05 and also one time from fw1.06,
with my pc and via wlan connection to the dcs-825l

it was something like this:

http://xxx.xxx.xxx.xxx/eng/mainFrame_debug.cgi?nav=Status#
or
http://xxx.xxx.xxx.xxx/eng/admin/tools_admin.cgi
main menue with fw1.03 for all settings

(http://fs2.directupload.net/images/150510/sl4h9c4p.jpg)
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on September 03, 2015, 11:33:30 AM
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.

If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.

Thank you,
Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on September 03, 2015, 12:29:54 PM
I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.

If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.

Thank you,
Roberto

hi

in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!

its writen under 3. (it is removed)
V1.05.04   
1.   Fixed the incorrect thermal LED status after reboot.
2.   Change the default system time for year 2015.
3.   Remove the hidden webpage for security concerns.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: francorg on September 03, 2015, 12:40:05 PM
That's strange... I could swear that in v1.05 I still had those cgi pages.
Why did you chose v1.03 and not v1.04?

Thank you,
Roberto
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rose05 on September 05, 2015, 08:59:58 PM
That's strange... I could swear that in v1.05 I still had those cgi pages.
Why did you chose v1.03 and not v1.04?

Thank you,
Roberto

hi 

I tested all of them and for me, all what I needed are in fw1.03, the others maybe need the last ones.
regards
alex
Title: Re: DCS-825L Web Pages: config and remote view
Post by: rinomasaya on September 14, 2015, 01:02:07 AM
More about.....Difference between Machine.config and web.config  (http://net-informations.com/faq/asp/machineconfig.htm)

Rino
Title: Re: DCS-825L Web Pages: config and remote view
Post by: Jawor on October 12, 2015, 12:05:05 PM
How am I to disable the sound we can hear after we turn on the device? I have installed the latest firmware of baby camera.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: JBilderbeek on November 11, 2016, 10:23:19 AM
Same problem here.
With the original firmware (1.01) I could acces the cgi pages. After upgrading to 1.04 not anymore.
After downgrading again still no luck...

I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.

If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.

Thank you,
Roberto

hi

in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!

its writen under 3. (it is removed)
V1.05.04   
1.   Fixed the incorrect thermal LED status after reboot.
2.   Change the default system time for year 2015.
3.   Remove the hidden webpage for security concerns.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on December 08, 2016, 06:52:32 AM
Does v1.06 do the same thing?
http://forums.dlink.com/index.php?topic=64806.0 (http://forums.dlink.com/index.php?topic=64806.0)

Same problem here.
With the original firmware (1.01) I could acces the cgi pages. After upgrading to 1.04 not anymore.
After downgrading again still no luck...

I was saying that I successfully downgraded to v1.05 but the "advanced" cgi pages were still missing after the downgrade to v1.05.

If someone else tries to downgrade please let me know if you get back those "advanced" cgi pages.

Thank you,
Roberto

hi

in fw 1.05 and 1.06 this are removed ... so I dont find a way,
also I use the fw1.03 and see no reason for the last firmware to use, if somebody like to use the hidden menues, only with old fw!

its writen under 3. (it is removed)
V1.05.04   
1.   Fixed the incorrect thermal LED status after reboot.
2.   Change the default system time for year 2015.
3.   Remove the hidden webpage for security concerns.
Title: Re: DCS-825L Web Pages: config and remote view
Post by: JBilderbeek on July 03, 2017, 09:06:59 AM
Hi,

Any chance of advanced config with firmware 1.08?
Need to change the settings of the recording. Now only very short recordings although there is movement all the time.
On the old cgi pages you could change the size/lenght of recordings.

Thnx in advance!
Title: Re: DCS-825L Web Pages: config and remote view
Post by: FurryNutz on July 03, 2017, 10:05:57 AM
Something you might ask D-Link phone support about. I presume since the 825L is getting long in the pants that no new feature maybe added to the FW...