D-Link Forums

D-Link FAQ => Network Camera FAQ => Topic started by: JavaLawyer on April 23, 2012, 12:16:37 PM

Title: DCS-9XX - Motion Detection Settings
Post by: JavaLawyer on April 23, 2012, 12:16:37 PM
This procedure describes how to configure motion detection on DCS-9XX series IP cameras.

Procedure


If your DCS-9XX is either too sensitive to motion or not detecting any motion, start testing Sensitivity values starting on the extreme end of the scale (i.e. 99% or 1%) and work your way inward (i.e. lower or higher) until the desired motion detection results are achieved.

Many DCS-930L/932L users reported motion Sensitivity values in the range of 5% to 10% to be adequate for their motion detection purposes. The optimal value for your DCS-930L/932L will depend, in part, on the ambient lighting and degree of background motion (e.g. tree leaves rustling) in the camera field of view.

Additional References: