D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-327L => Topic started by: wangelo on August 28, 2017, 06:02:12 AM

Title: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: wangelo on August 28, 2017, 06:02:12 AM

Hi everyone,

don't know if somebody has experienced my same issue, I have switched my pc to windows 10 and I cannot map/access to my shared folder anymore.
Apparently, this is due to the smb v1 issue which is not longer supported by win 10. Can somebody tell me how to solve this issue? e.g. Is it possible to upgrade DNS 327L to smb v2? or any other protocol that I can activate to map the folder?
Since a couple of weeks, I just can't use my NAS 327L.

Any comment would be helpful, thanks in advance.

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: FurryNutz on August 28, 2017, 08:09:15 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DNS? Look at the sticker behind or under the device.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.27 or .32.

Windows 10 Info: http://forums.dlink.com/index.php?topic=65722.0 (http://forums.dlink.com/index.php?topic=65722.0)

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: wangelo on September 01, 2017, 06:12:49 AM

Hello,
thanks for the reply.
The hardware version is R3RI1G3000058, B version.
The firmware is 1.09 (the latest)
I'm located in Italy
The Router is MediaAccess TG1100
The DNS gets a static IP address (always 192.168.1.72)

Any suggestion?
Thanks

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: FurryNutz on September 01, 2017, 09:59:04 AM

Any chance you can test a Windows 7 PC or laptop?

Has this been working at all or just started to do this recently?

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: wangelo on September 04, 2017, 06:54:32 AM

Hello,
with win 7 or win XP works perfectly.
The issue is with win 10.

Any suggestion?
Thanks

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: FurryNutz on September 06, 2017, 10:26:43 AM

Does this D-Link Easy Utility do anything to help:
http://forums.dlink.com/index.php?topic=64264.0 (http://forums.dlink.com/index.php?topic=64264.0)

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: regi on October 24, 2017, 05:52:03 AM

try this:

start powershell as admin

    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
    sc.exe config mrxsmb20 start= disabled

restart computer afterwards,

worked for me

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: FurryNutz on October 24, 2017, 10:03:47 AM

Thanks for posting this info. Hope it helps...

Title: Re: DNS 327L - unable to access to shared folder after updating to windows 10
Post by: FurryNutz on January 29, 2018, 09:38:33 AM

Some might try this?
Windows 10 Info:
http://forums.dlink.com/index.php?topic=65722.0 (http://forums.dlink.com/index.php?topic=65722.0)