D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNR-202L => Topic started by: gennysat on March 02, 2017, 08:59:02 AM

Title: Info Nvr 202l
Post by: gennysat on March 02, 2017, 08:59:02 AM

Hello everyone, I offer just recorded niei greetings to all friends of the forum from Italy, I apologize if I'm wrong place xi greetings, I purchased an online NVR202l, you are able to set it almost correct, what I can not understand, ?? I set is that as I turn off all the evening, the next morning to turn it back on, in-view nydkink nvr not find me anymore ip cams? what can I do, I also pressed the reset button next to the search of the cams, but nothing, what to set, grazi x any answers at all, I apologize but I use a translator.

Title: Re: Info Nvr 202l
Post by: FurryNutz on March 02, 2017, 09:06:51 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DNR? Look at the sticker behind or under the device.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DNRs web page under status.

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.20 or .202
Swap out LAN cables. Link> Cat6 is recommended. (http://en.wikipedia.org/wiki/CAT6)

What PC platform are you using?
What web browser are you using?
What is the LED indication on the top of the DNR?

Title: Re: Info Nvr 202l
Post by: gennysat on March 02, 2017, 09:51:08 AM

hi, it is thanks x the answer, I had already read that place, on nvr 202L I installed the latest firmware, as well as on 5020l cams, 932L, the router holds the a dlink 2770l, on nvr 202L, flashes the blue circle, the pC system is 7 pro, everything is connected via wifi, which I can assure you that it works, because the cams also the control with mydlink lite, and it's all ok, now with the pC on the lAN cable through everything ok, I turn off pc, I turn off all power back and x check that everything works fine, only with wifi, it is here I am in the mydlink lite okay, nydink of view-nvr without canes because, sorry if I'm repetitive, it is thanks again.

Title: Re: Info Nvr 202l
Post by: FurryNutz on March 02, 2017, 09:55:16 AM

So the issue your having problems with is the NVR app on the mobile phone?
"nly with wifi, it is here I am in the mydlink lite okay, nydink of view-nvr without canes because" <Sorry this is not comprehendable here.