D-Link Forums
		The Graveyard - Products No Longer Supported => Routers / COVR => DIR-890L => Topic started by: chetvolpe on September 21, 2015, 09:29:02 PM
		
			
			- 
				DIR-890L HW:A1    FW:1.08 connected to iMac  OS X 10.10.5
 
 When I enable both Ethernet and Wi-Fi on my Mac, I can not connect to internet (or the router). Any suggestions where to start.
 
 Chet
- 
				Is there a chance that this two connections are linking to the same network?  if so, you may want to use one or the other instead of both as this may be causing a loop on your network.  When this is happening, can other devices connect to the internet? 
 
- 
				Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
 
 - What region are you located?
 
 Internet Service Provider and Modem Configurations
 - What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
 
 Do you still have connect if you use either WiFi or Wired LAN separately?
- 
				Also something important to note, are you physically connected to an ethernet cable? Also, does this problem persist if Ethernet is disabled but a cable is plugged in? 
			
- 
				Any status on this?  ???
 
 DIR-890L HW:A1    FW:1.08 connected to iMac  OS X 10.10.5
 
 When I enable both Ethernet and Wi-Fi on my Mac, I can not connect to internet (or the router). Any suggestions where to start.
 
 Chet
 
 
- 
				Does it work on a windows pc? Might be mac issue. 
			
- 
				I presume this may have been a mis-configuration issue on the behalf of the user.  ::)
			
- 
				I presume this may have been a mis-configuration issue on the behalf of the user.  ::)
 
 
 No news is good news to me... maybe he figured it out?  ???
 
 
- 
				I hope so. Has not been back on since posting...