D-Link Forums
		D-Link Wireless Access Points For Business => DAP-1665 => Topic started by: reddevil0728 on May 15, 2015, 11:39:22 PM
		
			
			- 
				Can the stock antenna be replaced with a more powerful one?
If so how to find out which antenna is compatible with it.
Thank you.
			 
			
			- 
				The antenna are removable I believe. Not sure what other 3rd party antennas would be compatible though. You might want to phone contact D-Link support and ask...
			
 
			
			- 
				Hello,
Sorry to dig the topic, but I am interrested and it's the same problem.
D-Link tells me that it is possible.
I think putting antennas 8 or 14 dbi.
Have you seen difference ?
Thanks.
			 
			
			- 
				
Hello,
Sorry to dig the topic, but I am interrested and it's the same problem.
D-Link tells me that it is possible.
I think putting antennas 8 or 14 dbi.
Have you seen difference ?
Thanks.
didnt get it in the end
			 
			
			- 
				How well is your unit working for you? 
			
 
			
			- 
				
How well is your unit working for you? 
didn't even buy the unit in the end
			 
			
			- 
				 ::)
			
 
			
			- 
				Thanks for your response.
I search to decrease the dbm between the cameras and AP because I am sometimes freezes.
			 
			
			- 
				What happens if you lower the resolution of the cameras? Still freezes? 
			
 
			
			- 
				Yes it's the same problem and the camera at the first stage is often disconneted.
			
 
			
			- 
				Can you disconnect the DAP and connect the camera to the main host routers wifi and test? I presume if you still see the same problem, the camera maybe at fault here...
			
 
			
			- 
				Cameras on the main router is the old configuration.
I had many problems of disconnection with cameras on the main router.
It's for the reason I pass by another AP. With a Trendnet or my D-Link, I have no problem of disconnection. Sometimes The camera at the 1st floor disconnects. But with the two others cameras I have not disconnection.
I have interchanged the camera 1 and 2, and I have the same problem on the camera 2 at the 1st floor.
With the 2 cameras in the same room of the DAP, no problem.
The 2 cameras at the 1st floor, sometimes the cameras freeze.
It's the same problem in 2.4GHz and 5GHz.
I have between -70/-80dbm at the 1st floor.
That is why, I think changing the antennas.
			 
			
			- 
				Any chance of moving the DAP to a different location and closer to the cameras? 
Seems like this maybe a signal issue...
What channels is the DAP using? 
			 
			
			- 
				It's the better location for the DAP and the 3 cameras. The DAP is in the middle of the 3 cameras and there is no obstacle. I tested with Wifi Analiser and I have better results at this location. 
It's the channel 44. Same problem with 36, 48, etc. and there are not other network at 5GHz.
			 
			
			- 
				Ok. Not sure if this is a DAP or camera issue or a combined problem between these units. 
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email. I would start with the camera group first...
Let us know how it goes please.