D-Link Forums

The Graveyard - Products No Longer Supported => Other D-Link Products => DSP-W215 => Topic started by: ejeklint on March 30, 2015, 10:05:01 AM

Title: Loses connection...
Post by: ejeklint on March 30, 2015, 10:05:01 AM

My plug lose the wifi connection occasionally. Un-/replugging it will make it connect automatically but that's hard to do when you're not around. Is this a known issue? Anything that could help prevent it? Wifi access point setting? (I'm using an Apple Airport Extreme, tower model)

Title: Re: Loses connection...
Post by: FurryNutz on March 30, 2015, 10:42:57 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What region are you located?

What wireless modes are you using on the AE?
What is the distance between the AE and the DSP?

Title: Re: Loses connection...
Post by: ejeklint on April 25, 2015, 02:54:08 AM

Sorry for late reply, I expected a notification for new replies... :)

I'm in Sweden. The distance between the units are about 8 meters and reception at that place is generally very good. The AE is on dual band, automatic channel selection.

Title: Re: Loses connection...
Post by: FurryNutz on April 25, 2015, 02:46:30 PM

• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channels) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.