D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2332L => Topic started by: fousa on June 06, 2014, 08:03:21 AM
-
My DCS-2332L stopped recording to SD and can't access it (MicroSD).
If I disconnect camera from electricity or remove and insert card, it is recognized by cam but give this error after some seconds. Reboot or default settings did not solved.
I bought an adapter MicroSD to SD to scan the card for errors on laptop. Anyone with this problem?
32GB card.
(http://i.imgur.com/UJsO3E8.png)
(http://i.imgur.com/ef7HnAZ.png)
-
I do not recognize this in relation to my 2332, but do had some troubles with my 5222 that relate.
This (http://forums.dlink.com/index.php?topic=55340.msg214093#msg214093) is what worked for me:
I had difficulties myself, it gave a status "invalid" and after the firmware upgrade to 1.10 SD Status "Reinitializing". I found a solution in processing the following steps:
- Format the MicroSD in your computer on NTFS
- Disable SD Recording (duh ;D)
- Disable Motion Detection (Don't know if it makes any sense, but I happen to do this at the time together with step 1)
- Insert the SD Card and format it from out the "SD Maintenance" menu.
I do not use additional software, just the webinterface.
Formatting the SD Card to FAT or FAT32 (with different sectorsizes) did not work, so I guess the key lies within the NTFS formatting on default settings.
Please let us know if it worked :)
A little more in the topic itself: http://forums.dlink.com/index.php?topic=55340.msg214093 (http://A little more in the topic itself: http://forums.dlink.com/index.php?topic=55340.msg214093)
-
Thanks, I will try that. I think the key will be formatting the SD card on the computer.
-
An update:
It was the card. Had bad sectors. Bought a new one.
-
thanks, i had been thinking maybe my card was bad. i will look to replace since no other recommended solutions seem to correct the issue.
-
Thanks for letting us know. Hope this helps future users.