D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: bdlnaredi on February 22, 2014, 11:11:27 PM

Title: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: bdlnaredi on February 22, 2014, 11:11:27 PM
I just bought a new Dlink dsl 2750u modem+router.
I have a 3 TB Seagate hdd that I want to connect to the router via usb.
the router's F/W is IN_1.08

now how can I connect my usb hdd to the router and access it on my laptop over wifi?
plz explain it step by step.
thanks.
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: FurryNutz on February 24, 2014, 10:02:02 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)


I recommend that you review the User Manual for information regarding this. Also phone contact your regional D-Link support office for additional help.

Can try this as well:
How to map a USB Drive to your PC without using Shareport software (http://forums.dlink.com/index.php?topic=46133.0)

Replace the 192.168.0.1 with 192.168.1.1 for DSL modems.
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: bdlnaredi on February 24, 2014, 07:20:17 PM
@FurryNutz
i enabled samba on my router but still cant access my hdd
but when i attached my pendrive to the router it worked smoothly

i m using seagate backup plus 3TB.
does it support?
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: FurryNutz on February 26, 2014, 07:41:23 AM
You'll need to phone contact D-Link support and ask them what there DSL Model modems support. Most DIR series routers only officially support 500Gb with NTFS formatting. If the small sized pendrive worked, I presume that 3Tb may not be supported.

Good Luck.
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: zhjook on March 05, 2014, 10:00:13 AM
you kan flash your 2750 to 2760u-e1 ,connect your hdd to a usb-sata dock ,used samba of 2760u-e1

(http://)
see more pictue here
http://www.chinadsl.net/forum.php?mod=viewthread&tid=87877
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: FurryNutz on March 06, 2014, 07:39:17 AM
Where is this 2760u-E1 FW located at?

Quote from: zhjook on March 05, 2014, 10:00:13 AM
you kan flash your 2750 to 2760u-e1 ,connect your hdd to a usb-sata dock ,used samba of 2760u-e1

(http://)
see more pictue here
http://www.chinadsl.net/forum.php?mod=viewthread&tid=87877
Title: Re: How can i connect my Seagate hdd to Dlink dsl 2750u ?
Post by: FurryNutz on March 08, 2014, 09:32:49 AM
@ zhjook

Links removed...

Sorry, however those links are to un-official D-Link sites which is not allowed here in the forums. Only officially supported D-Links sites are allowed.