D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-932L => Topic started by: keef74 on February 12, 2014, 09:07:25 PM
-
Hello forum, Having issues with a DCS-932L I removed the camera from my old account/deleted mydlink account. I have downloaded software re-install the camera and once I get past section where the camera check for green led.
The camera is showing as unregistered in the setup and is asking for the Admin Account password. I don't know the correct password.
I have reset the device numerous times and NOTHING still asks for password and sits on unregistered. I have no idea where to go from here.
My home router has current firmware. The camera was previously working I just needed to re-create a new account. So much hassle Now.
Please Help
-
Once the device has been reset, it should reset the login and password to their default values.
The default login is "admin" and leave the password blank.
-
Hello Ted, I have reset camera (hold in a paper clip 4 secs) the led turns red. I then power off camera and let it sit 2 minutes turn it on the LED goes green.
It is still asking for pasword I tried the default username:admin passord:blank
No luck Thanks for your help
-
After 4 or 5 tries reset It now works, Thank you !
-
Hello Ted, I have reset camera (hold in a paper clip 4 secs) the led turns red. I then power off camera and let it sit 2 minutes turn it on the LED goes green.
It is still asking for pasword I tried the default username:admin passord:blank
No luck Thanks for your help
There's a good chance you didn't hold the recessed Reset button long enough, causing the factory reset not to work the first few times. I'm glad everything worked out. ;)