D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-930L => Topic started by: JavaLawyer on August 16, 2011, 04:18:19 AM
-
Now that the DCS-930 has a dedicated board, we can restart our firmware wishlist.
-
It would be oh-so-nice if the ftp filename Date/Time Suffix would include a bit of segmenting punctuation, so that instead of:
DCS-930L_2011090114562601.jpg
we could have
DCS-930L_20110901_14562601.jpg
or
DCS-930L_2011.0901.1456.2601.jpg
for easier readability
I hope the dlink developers read this!
-
It would be nice if the status panel could indicate how many connections of what type are being served.
-
Upon motion detection (scheduled!), then ftp multiple images, pre- and post-trigger, just like the email does.
-
Please, have Status page (http://x.x.x.x/stsdev.htm) indicate summary of reporting status, i.e. is email or ftp enabled, is motion detection enabled.
It should be easy to at least have a row if numbers.
And, make the time readout REAL - the time shown appears to be a javascript clock that stops and starts, so it is not truly indicating the status of the camera.
-
Please provide a choice of 2 fps in the Video panel (currently 1,5,7,15,20,[30]) - perhaps could be 1,2,4,8,15,...
The gap from 1 to 5 is quite large, and 1 is just a tad jerky.
-
The request for 2 fps video rate should have said "also in motion detector + ftp, or + email, mode"
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
General - Status page containing the number and type of connections currently served AND ACTUAL TIME OR OPERATIONAL STATUS -
currently, a javascript keeps time incrementing making it appear the camera is connected even when powered off.
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
ftp setup - have the response to the test message appear on the ftp setup page with a refresh, rather than going thru 3 pages and back
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
Add a specific control for user language
(the French menus after firmware update were a bit of confusion!)
Or at least a help comment on the firmware page, about need to restart after updating!
But, what if I WERE French?
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Add control for user language
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
I will put this on the top of the list:
•Motion Detection - Motion detection email on a user defined schedule
My use case: I want to monitor my home while the kids are at school, so that they return to safe home.
The user define schedule in my case is M-F from 9 AM to 3 PM and don't want to be flooded with motion detection e-mail alerts at other times, when we are home.
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Option to include date and time stamps on captured images
- General - Add control for user language
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Admin password length too short
- General - User password length too short
- General - Add more detail to status page: e.g. email enabled or ftp enabled, motion detection enabled etc.
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Option to include date and time stamps on captured images
- General - Add control for user language
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (indpendent of video FPS)
- FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Audio - Resolve intermittent background audio clicking
-
I will put this on the top of the list:
•Motion Detection - Motion detection email on a user defined schedule
My use case: I want to monitor my home while the kids are at school, so that they return to safe home.
The user define schedule in my case is M-F from 9 AM to 3 PM and don't want to be flooded with motion detection e-mail alerts at other times, when we are home.
Yep, that's been my #1 gripe since Day 1!
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- mydlink - mydlink registration independent of device configuration wizard
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Security: Allow userid for the DCS-930L be defined as a "view only" level, that is can not view or modify settings.
This would be nice also for the MyDLink site but that is not a firmware issue......RDK
-
Security: Allow userid for the DCS-930L be defined as a "view only" level, that is can not view or modify settings.
This would be nice also for the MyDLink site but that is not a firmware issue......RDK
This item was previously added to the mydlink wishlist (i.e. request for a guest account with no access to the DCS-XXX settings)
-
JavaLawyer.....OK for the DLink web site. However, I was requesting a "view video only" account on the DLink Camera itself. They allow for setting up accounts, but those accounts are "all powerful", I'd like an option for a "view video only" type so local users could view the camera video but not be able to mess with the settings.......RDK
-
JavaLawyer.....OK for the DLink web site. However, I was requesting a "view video only" account on the DLink Camera itself. They allow for setting up accounts, but those accounts are "all powerful", I'd like an option for a "view video only" type so local users could view the camera video but not be able to mess with the settings.......RDK
Added. . . .
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Ability to add accounts without administrative access to camera settings or web interface (i.e. view only account)
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
I will put this on the top of the list:
•Motion Detection - Motion detection email on a user defined schedule
My use case: I want to monitor my home while the kids are at school, so that they return to safe home.
The user define schedule in my case is M-F from 9 AM to 3 PM and don't want to be flooded with motion detection e-mail alerts at other times, when we are home.
I concur for both email and ftp. I'm putting our camera at our campground which is only open weekends and don't want to have to remember to turn it on and off.
-
Not sure how to categorize this:
For the FTP option, Image frequency 1 sec, File Date/Time suffix, create subfolder by 1 day. This would create a very large folder size. Even large multiple folders over an extended period of time.
- Request an option to delete previous folder? or keep only 24 hours of xx hours then overwrite older files?
-
Not sure how to categorize this:
For the FTP option, Image frequency 1 sec, File Date/Time suffix, create subfolder by 1 day. This would create a very large folder size. Even large multiple folders over an extended period of time.
- Request an option to delete previous folder? or keep only 24 hours of xx hours then overwrite older files?
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Ability to add accounts without administrative access to camera settings or web interface (i.e. view only account)
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
JavaLawyer....I think that my firmware wish request (Nov 26) was in error!!
JavaLawyer.....OK for the DLink web site. However, I was requesting a "view video only" account on the DLink Camera itself. They allow for setting up accounts, but those accounts are "all powerful", I'd like an option for a "view video only" type so local users could view the camera video but not be able to mess with the settings.......RDK
I have just discovered that I CAN create additional ID/PW combinations and that they DO NOT have "admin" authority to access and change the camera setting. So please remove that item from your list.
Also I strongly second the requests for a combined Schedule and Motion Detection trigger for FTP and E-Mails.
Thanks....RDK
-
JavaLawyer....I think that my firmware wish request (Nov 26) was in error!!
I have just discovered that I CAN create additional ID/PW combinations and that they DO NOT have "admin" authority to access and change the camera setting. So please remove that item from your list.
Also I strongly second the requests for a combined Schedule and Motion Detection trigger for FTP and E-Mails.
Thanks....RDK
Thanks for catching that oversight ;)
Removed....
-
Below is a summary of everyone's input thus far. Please let me know if I over-generalized, misrepresented, or overlooked anyone's concerns and I'll refresh the list with updates. Recent updates are in blue.
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Motion Detection - Motion detection email on a user defined schedule
Motion Detection - Motion detection FTP on a schedule
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
I didn't quite see this listed but....
Motion Detection: Add delay interval for emails to prevent the camera from sending too many emails within a short time span (i.e. only send a motion detection email if 5 or 10 minutes have passed from last email alert)
-
I didn't quite see this listed but....
Motion Detection: Add delay interval for emails to prevent the camera from sending too many emails within a short time span (i.e. only send a motion detection email if 5 or 10 minutes have passed from last email alert)
Already included...
Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
-
Already included...
Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
Sorry, didn't read the last updated list. Thanks!
-
Sorry, didn't read the last updated list. Thanks!
No problem. . . The firmware wishlist (and thread) are getting pretty long.
-
A local PC (Mac) on my LAN. I haven't enabled d-link, and am not likely to, for security reasons.
I split your question into a new post since this isn't related to the firmware wishlist: Password Issue (http://forums.dlink.com/index.php?topic=45051.0)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
-
Can you please, please add an option to bump up the wireless power? If it's beta I'm willing to test it. : )
Turns out I can't use wireless because it can't detect my network (unless in the same room). I've tried changing channels, upping my router's transmission power (mW). No wireless joy for me.
-
Can you please, please add an option to bump up the wireless power? If it's beta I'm willing to test it. : )
Turns out I can't use wireless because it can't detect my network (unless in the same room). I've tried changing channels, upping my router's transmission power (mW). No wireless joy for me.
Unfortunately, this list is only for changes impacting firmware. Increasing the wireless power may cross into the realm of hardware and may impact the technical specifications. ???
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
- Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
In addition to existing "flip image" which is rotating 180 degrees, please add 90 and 270 degrees as well.
-
In addition to existing "flip image" which is rotating 180 degrees, please add 90 and 270 degrees as well.
Added... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
@JavaLawyer great, thanks!
I sure helps to get those extra angles when I'm in a hurry to shove the webcam into a dove's nest and connect the power and ethernet, without spooking them so much that they abandon the eggs. ;D
(http://i.imgur.com/szHoHl.jpg)
-
@JavaLawyer great, thanks!
I sure helps to get those extra angles when I'm in a hurry to shove the webcam into a dove's nest and connect the power and ethernet, without spooking them so much that they abandon the eggs. ;D
No problem. I never thought anyone would be using the DCS-930L for bird watching. ;)
-
It would be useful to have the Function selection (ActiveX or Java) radio button settings saved/default specified. Would eliminate having to keep selecting one or the other after user authenticates.
-
It would be useful to have the Function selection (ActiveX or Java) radio button settings saved/default specified. Would eliminate having to keep selecting one or the other after user authenticates.
Added... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
I got hit with the same issue but in all fairness, the fieldbox for setting the password is only 8 characters long and your web browser won't let you type any further- if you press keys on your keyboard it just doesn't go anywhere! There's a message above which says passwords must be 6-8 characters if I recall correctly. That being said, I don't understand why the 930L only supports 8 letters yet the 942L supports more!
-
I got hit with the same issue but in all fairness, the fieldbox for setting the password is only 8 characters long and your web browser won't let you type any further- if you press keys on your keyboard it just doesn't go anywhere! There's a message above which says passwords must be 6-8 characters if I recall correctly. That being said, I don't understand why the 930L only supports 8 letters yet the 942L supports more!
The DCS-932L has the same limitation. Even though the warning text is present, there's no overt message if you try to type further. There were many users who couldn't log into their DCS-93X because they thought there 9+ length password was accepted, when in fact, just the first 8 characters were saved.[/list]
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
I know I may be dreaming here to ask for this given its in the more expensive 942L model but would it be possible too get some kind of OSD as well with a time and date stamp on the live feed when viewed on the iOS app? This is a sure way of knowing whether or not there are new images loaded, adds detail to the screenshots, etc. doesn't have to be super fancy but happy with date and time, or if feeling really generous, camera name and or custom message as well.
-
Can we also please address this bug?
http://forums.dlink.com/index.php?topic=48413.0
-
I know I may be dreaming here to ask for this given its in the more expensive 942L model but would it be possible too get some kind of OSD as well with a time and date stamp on the live feed when viewed on the iOS app? This is a sure way of knowing whether or not there are new images loaded, adds detail to the screenshots, etc. doesn't have to be super fancy but happy with date and time, or if feeling really generous, camera name and or custom message as well.
I'll add this to the mydlink wishlist (where the mobile device apps are addressed...)
myDlink.com Wishlist (http://forums.dlink.com/index.php?topic=41091.0)
-
Can we also please address this bug?
http://forums.dlink.com/index.php?topic=48413.0
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
I'll add this to the mydlink wishlist (where the mobile device apps are addressed...)
myDlink.com Wishlist (http://forums.dlink.com/index.php?topic=41091.0)
Thanks. I presumed it's a firmware feature of the camera though rather than the application based on how it's implemented in the 942L though. Either way not too fussed as long as there is some way to tell its working. Thanks again.
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Just thought I'd poke my head in here to see if there were any release notes accompanying the 1.06 firmware release that I pushed out to all 6 of my cameras moments ago.
Nope! >:(
I also see that the wishlist continues to grow and that motion detection on a schedule still eludes us after 1.5 years! ???
(sigh) Quite frustrating. All in all though, all 6 cameras are still running strong.
-
Just thought I'd poke my head in here to see if there were any release notes accompanying the 1.06 firmware release that I pushed out to all 6 of my cameras moments ago.
Nope! >:(
I also see that the wishlist continues to grow and that motion detection on a schedule still eludes us after 1.5 years! ???
(sigh) Quite frustrating. All in all though, all 6 cameras are still running strong.
We're all still waiting for the elusive change log for this latest release. . . :-\
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Motion detection - as well as reducing the frequency of e-mails, could you also please make the setting apply to FTP posts? Reducing the sensitivity means that some events are missed, but when a trigger occurs there are still a flood of images to look through, up to seven per second, whereas one every second or two would be plenty.
Thanks,
Tony Heaton.
-
Motion detection - as well as reducing the frequency of e-mails, could you also please make the setting apply to FTP posts? Reducing the sensitivity means that some events are missed, but when a trigger occurs there are still a flood of images to look through, up to seven per second, whereas one every second or two would be plenty.
Thanks,
Tony Heaton.
Added... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
1) Fix the Time-zone issue. Every time you change the timezone the device gets confused.
2) The other issue is that I wish these supported secure logins, AFAIK they are plain text, not over SSL.
This should be a quick fix to allow this over SSL, port 443...
3) Add a feature that would allow motion detect only during certain hours, like so many other vendors do (like even FosCam).
-
1) Fix the Time-zone issue. Every time you change the timezone the device gets confused.
2) The other issue is that I wish these supported secure logins, AFAIK they are plain text, not over SSL.
This should be a quick fix to allow this over SSL, port 443...
3) Add a feature that would allow motion detect only during certain hours, like so many other vendors do (like even FosCam).
Items two and three are already listed. Can you elaborate on the timezone issue? Are other users reporting a similar issue?
-
I would like the feature that gives some information on in what area movement is detected in the email or in the acctual image.
I guess the hardware in the camera is not powerfull to manipulate the image, but writing a text string in the email in what block detection is over the threshold should work.
~JoGi
-
I would like the feature that gives some information on in what area movement is detected in the email or in the acctual image.
I guess the hardware in the camera is not powerfull to manipulate the image, but writing a text string in the email in what block detection is over the threshold should work.
Interesting idea! Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
You can change the time zone, or the offset, then change it back, then hit save, and it will have the wrong time, or it will display the correct time on that page, until you start watching video, and then the Video time is off... same on the DCS-930L. If syncing to say north-america.pool.ntp.org (or another verified working varient) it NEVER syncs to the right time (it does on all windows boxes and any other device I ever tried).
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Hello,
I noticed that when FTP upload is in use in case of motion detection, camera is uploading images every 2-3 seconds. I this could have two reasons - or just fixed fps, or FTP connection is taking some time; most probably to upload each photo camera is opening an FTP connection and closing. So would be nice to keep FTP connection open for some period, i.e. motion detection - open FTP - upload X photos - no motion for 30 seconds - close FTP.
Thanks.
-
Hello,
I noticed that when FTP upload is in use in case of motion detection, camera is uploading images every 2-3 seconds. I this could have two reasons - or just fixed fps, or FTP connection is taking some time; most probably to upload each photo camera is opening an FTP connection and closing. So would be nice to keep FTP connection open for some period, i.e. motion detection - open FTP - upload X photos - no motion for 30 seconds - close FTP.
I'm not sure I fully understand what you are proposing here. Are you suggesting the FTP session should remain open until all images from the motion detection event are pushed to the server? (rather than open/close, open/close, open/close, etc).
-
Does the latest firmware update fix any issues on the firmware wishlist? If the answer is "yes", please post your findings here!
-
I'm not sure I fully understand what you are proposing here. Are you suggesting the FTP session should remain open until all images from the motion detection event are pushed to the server? (rather than open/close, open/close, open/close, etc).
Hi JavaLawyer,
Yes, exactly.
-
Hello,
I noticed that when FTP upload is in use in case of motion detection, camera is uploading images every 2-3 seconds. I this could have two reasons - or just fixed fps, or FTP connection is taking some time; most probably to upload each photo camera is opening an FTP connection and closing. So would be nice to keep FTP connection open for some period, i.e. motion detection - open FTP - upload X photos - no motion for 30 seconds - close FTP.
Thanks.
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Hi.
I can't find this feature in the compiled list nor in my device (1.06).
Upon motion detection (scheduled!), then ftp multiple images, pre- and post-trigger, just like the email does.
-
Hi.
I can't find this feature in the compiled list nor in my device (1.06).
Upon motion detection (scheduled!), then ftp multiple images, pre- and post-trigger, just like the email does.
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
D-Link released firmware version 1.07 build 05, located here: Firmware v1.07b05 (http://pmdap.dlink.com.tw/PMD/GetAgileFile?itemNumber=FIR1200651&fileName=dcs930l_v107_b5.zip&fileSize=3620467.0;432640.0;)
Please post your comments and observations here: DCS-930L - Firmware v1.07b05 Comments & Observations (http://forums.dlink.com/index.php?topic=52213.0)
-
D-Link posted version 1.02.03 of the Setup Wizard here: D-Link Taiwan Site (Downloads) (http://tsd.dlink.com.tw/)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
I've been reviewing this list and have some questions for the DCS-930L owner community:
- Can a DCS-930L owner validate whether whether the DCS-930L still has any password length constraints (8 characters) on the latest? This issue was fixed on newer DCS-932L firmware.
- Can a DCS-930L camera owner validate whether the image zooms from the center of the video frame versus the corner. This issue was also fixed on newer DCS-932L firmware.
- Are there other issues that were fixed?
Thanks!
-
Hi, I use ftp to upload images to a yahoo website. Yahoo is enforcing ftps, a secure version of ftp using SSL?
I would like to request that the DCS-930L firmware support ftps in a future release. Yahoo is disabling ftp Feb 19, 2013...so my webcam feed from the dCS-930L magically disappears on that date.
Thanks,
g
-
Hi, I use ftp to upload images to a yahoo website. Yahoo is enforcing ftps, a secure version of ftp using SSL?
I would like to request that the DCS-930L firmware support ftps in a future release. Yahoo is disabling ftp Feb 19, 2013...so my webcam feed from the dCS-930L magically disappears on that date.
Thanks,
g
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Admin password length too short
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
-
Is there a model in your product line that will allow me to send email on motion detection during a specified schedule? This product is worthless without that feature. Not sure what this product is for otherwise. The schedule feature sends pictures at a specified interval. Does one really expect the user to troll through hundreds of emails daily to see if anything happened? Or, if I set it to motion detection. Is it for my own amusement to take random photos of me while at home and send useless emails to myself?
The most troubling aspect is I just purchased this product 3-20-2013. nearly 2 years after original posts requesting D-Link to resolve this issue and the issue still exists! Exactly what does D-Link garner from its forums. This puts a bad taste in my mouth about the whole D-Link product line. Look for these products to be shipped back to your inventory. Very dismal performance D-Link
-
Is there a model in your product line that will allow me to send email on motion detection during a specified schedule? This product is worthless without that feature. Not sure what this product is for otherwise. The schedule feature sends pictures at a specified interval. Does one really expect the user to troll through hundreds of emails daily to see if anything happened? Or, if I set it to motion detection. Is it for my own amusement to take random photos of me while at home and send useless emails to myself?
The most troubling aspect is I just purchased this product 3-20-2013. nearly 2 years after original posts requesting D-Link to resolve this issue and the issue still exists! Exactly what does D-Link garner from its forums. This puts a bad taste in my mouth about the whole D-Link product line. Look for these products to be shipped back to your inventory. Very dismal performance D-Link
The new DCS-933L, successor to the DCS-932L, contains motion detection on a schedule functionality.
-
ok, I tried the longer password with 1.08 fw and seem to be working. Will test special characters :-)
Updating list. . . ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
General - Admin password length too short [FIXED!]
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
[Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
One thing I do not like in the wireless setup page is that it shows the pre-shared key that you previously entered in plain text. None of my other WiFi connected devices (nor does my router) do this - they all just show dots instead for security purposes so that your WiFi network password is never displayed.
I'd like the 930 to do this as well.
-
I will put this on the top of the list:
•Motion Detection - Motion detection email on a user defined schedule
My use case: I want to monitor my home while the kids are at school, so that they return to safe home.
The user define schedule in my case is M-F from 9 AM to 3 PM and don't want to be flooded with motion detection e-mail alerts at other times, when we are home.
You would be better served by buying an updated camera that has these features.
For real - Nothing is going to happen for a 930L.
(http://s13.postimg.org/443ojlcib/2132l_events_0.jpg) (http://postimg.org/image/443ojlcib/)
(http://s13.postimg.org/rjlloxw9f/2132l_events.jpg) (http://postimg.org/image/rjlloxw9f/)
-
You would be better served by buying an updated camera that has these features.
For real - Nothing is going to happen for a 930L.
(http://s13.postimg.org/443ojlcib/2132l_events_0.jpg) (http://postimg.org/image/443ojlcib/)
(http://s13.postimg.org/rjlloxw9f/2132l_events.jpg) (http://postimg.org/image/rjlloxw9f/)
My bad... I replied to a post from 2+ years ago... and just "fast forwarded" to the end of this post and saw the 932 or 933 or something has this functionality...
:-\ ::)
-
My bad... I replied to a post from 2+ years ago... and just "fast forwarded" to the end of this post and saw the 932 or 933 or something has this functionality...
:-\ ::)
Happens to all of us. ;)
. . . And thanks for sharing the DCS-2132L screenshots
-
One thing I do not like in the wireless setup page is that it shows the pre-shared key that you previously entered in plain text. None of my other WiFi connected devices (nor does my router) do this - they all just show dots instead for security purposes so that your WiFi network password is never displayed.
I'd like the 930 to do this as well.
Added... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
General - Admin password length too short [FIXED!]
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
[Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Since I bought mine in the last 6 months, assuming that they would work, and they are already outdated, can we get them to upgrade us for free? :)
-
Since I bought mine in the last 6 months, assuming that they would work, and they are already outdated, can we get them to upgrade us for free? :)
Wishful thinking ;)
-
What about an 640x480 image option? Why are they always half resolution?
-
What about an 640x480 image option? Why are they always half resolution?
Are you refering to viewing video from mydlink?
-
Are you refering to viewing video from mydlink?
Ah, sorry - I've been using this thing for 6 months but only for still images. Just discovered that the *video* settings also apply to the still images: that's a bit of a surprise for me, compared to how other devices work. But now it does exactly what I want!
cheers!
-
Ah, sorry - I've been using this thing for 6 months but only for still images. Just discovered that the *video* settings also apply to the still images: that's a bit of a surprise for me, compared to how other devices work. But now it does exactly what I want!
cheers!
No problem! ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
General - Admin password length too short [FIXED!]
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
[Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Ok, me again. I'm using the ftp time scheduled upload to create frames for a time-lapse movie. This works nicely but the sky is strongly overexposed (i.e. often just plain white). I tried adjusting the brightness, but this appears not to affect the exposure - only the jpeg processing. This means that I don't see the clouds any better - the sky just becomes a bit more grey. I would like to be able to adjust the camera exposure. I presume it is a fixed aperture, so this would mean adjusting the exposure time. The camera obviously sets this automatically: it would be great to have a similar dropdown to the brightness/contrast controls allowing step adjustments to the exposure (-5 to +5, probably in 0.5 EV units, so -2.5 to +2.5 EV).
-
Ok, me again. I'm using the ftp time scheduled upload to create frames for a time-lapse movie. This works nicely but the sky is strongly overexposed (i.e. often just plain white). I tried adjusting the brightness, but this appears not to affect the exposure - only the jpeg processing. This means that I don't see the clouds any better - the sky just becomes a bit more grey. I would like to be able to adjust the camera exposure. I presume it is a fixed aperture, so this would mean adjusting the exposure time. The camera obviously sets this automatically: it would be great to have a similar dropdown to the brightness/contrast controls allowing step adjustments to the exposure (-5 to +5, probably in 0.5 EV units, so -2.5 to +2.5 EV).
Added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue. Items fixed in the latest firmware update are
striked out.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
General - Admin password length too short [FIXED!]
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
[Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
D-Link released v1.1.3 of Justconnect+ for the iPhone and iPad.
The product description and download link are located here: Justconnect+ Mobile App (http://forums.dlink.com/index.php?topic=53472.0)
Please post your comments and observations for v1.1.3 here: Justconnect+ v1.1.3 - Comments & Observations (http://forums.dlink.com/index.php?topic=55199.0)
"Justconnect+ is an easy, intuitive and powerful application allowing you to keep an eye on your home, office or facilities anytime and anywhere. You can monitor camera live view, control PTZ cameras, create snapshoot, send email with snapshot and trigger digital output with clicks."
:) :) :)
-
Not sure if the intent is already on the wish list but here is my request.
Going to ftp, motion detection automatically saves a image at a user defined level. For example, motion detected, camera then sends via ftp to storage 1 image every x seconds for x minutes then resets. This will give us a kind of live view or video recording as frames when motion is detected. Something similar to the email but I would set it to record 1 frame a second for 3 minutes giving me 240 images for one motion detection event.
Storage on a NAS is cheap!
-
Not sure if the intent is already on the wish list but here is my request.
Going to ftp, motion detection automatically saves a image at a user defined level. For example, motion detected, camera then sends via ftp to storage 1 image every x seconds for x minutes then resets. This will give us a kind of live view or video recording as frames when motion is detected. Something similar to the email but I would set it to record 1 frame a second for 3 minutes giving me 240 images for one motion detection event.
Storage on a NAS is cheap!
At that rate, the request might as well be the ability to FTP video for a user defined interval following a motion detection event. ;)
Request added...
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
General - Admin password length too short [FIXED!]
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- General - User password length too short
Audio - Resolve intermittent background audio clicking
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes)
- mydlink - mydlink registration independent of device configuration wizard
- Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Motion Detection - Motion detection email on a user defined schedule
Motion Detection - Motion detection FTP on a schedule
Still can't believe this hasn't been implemented. :(
Hats off to you for your continued work on this! :)
-
Motion Detection - Motion detection email on a user defined schedule
Motion Detection - Motion detection FTP on a schedule
Still can't believe this hasn't been implemented. :(
Hats off to you for your continued work on this! :)
You've asked for it and D-Link has delivered. Firmware v1.09b02 is now out and includes motion detection on a schedule.
- DCS-930L - Firmware v1.09b02 - Comments & Observations (http://forums.dlink.com/index.php?topic=57216.0)
- DCS-930L - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=42832.0)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
FTP upon motion detection needs to have positive selection and control of frame rate regardless of distance to the receiving server
-
FTP upon motion detection needs to have positive selection and control of frame rate regardless of distance to the receiving server
Would you please elaborate on this request?
-
Would you please elaborate on this request?
WOW, I finally had time to check out the (motion detection triggered) ftp frame rate (/interval) controls in the 1.09 firmware.
The controls now work!
I tried setting for 1,2, or 3 fps; or 2 second intervals - all work at long last.
This is with a remote (across the continent) ftp server.
Also. we have not experienced a "zero-byte" file since installing the new firmware 3 weeks ago.
-
If you find any new features or bug fixes in the latest DCS-930L firmware v1.09b02 release that address any of the outstanding items on this wishlist, please post your findings so we can update the list! ;)
-
URGENT : Update firmware to comply with Java 7u51 (Jan. 2014) !!
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Option to have cam name and date/time (24hr format) superimposed on FTP images and on live web video, as in the cam's own LIVE VIEW page :
(http://web.ncf.ca/as822/ndt.jpg)
-
Option to have cam name and date/time (24hr format) superimposed on FTP images and on live web video, as in the cam's own LIVE VIEW page :
(http://web.ncf.ca/as822/ndt.jpg)
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- Genera - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Some background:
When one clicks in Setup/FTP to send an FTP Test Message, the camera stores the test message in the server at "Host Name"+"Path".
(incidentally, explicitly placing a "/" at the beginning of Path *appears* to be optional under v1.09).
However, before writing the TestMessage image to the server, the camera generates a Date/Time Suffix folder (at least, when that option is selected) named as the appropriate time interval inside the appropriate Day folder. If there are no motion triggers during that interval, then this folder remains empty. This can lead to confusion.
Recommendation: Test Message should go into the new created folder; or, do not create new folder, in response to TestMessage request.
This behavior was discovered while reviewing server logs, during troubleshooting of the inability of DCS-930L cameras to write to named domain as Host Name (workaround: numeric IP).
-
Can we have a log file or does onboard memory size not allow this.
-
Some background:
When one clicks in Setup/FTP to send an FTP Test Message, the camera stores the test message in the server at "Host Name"+"Path".
(incidentally, explicitly placing a "/" at the beginning of Path *appears* to be optional under v1.09).
However, before writing the TestMessage image to the server, the camera generates a Date/Time Suffix folder (at least, when that option is selected) named as the appropriate time interval inside the appropriate Day folder. If there are no motion triggers during that interval, then this folder remains empty. This can lead to confusion.
Recommendation: Test Message should go into the new created folder; or, do not create new folder, in response to TestMessage request.
This behavior was discovered while reviewing server logs, during troubleshooting of the inability of DCS-930L cameras to write to named domain as Host Name (workaround: numeric IP).
Added to the firmware wishlist... ;)
-
Can we have a log file or does onboard memory size not allow this.
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Time setting for video brightness and contrast. I.e. day time, I want 0 contrast, -1 brightness. Nighttime -1 contrast, +2 brightness.
-
Time setting for video brightness and contrast. I.e. day time, I want 0 contrast, -1 brightness. Nighttime -1 contrast, +2 brightness.
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
General request:
Can we have an option to make the green indicator light flash anytime the camera is being viewed remotely, internal on the network, or both? I see it flashes when I access via a hardwired LAN, but I'd also like the option for it to flash when someone from the outside is viewing it remotely.
Basically, steady light = no one viewing. Flashing light = someone, somewhere, viewing. Or maybe even different flash patterns to indicate if being viewed by a remote user or one on the wifi network.
Thanks for considering.
-
General request:
Can we have an option to make the green indicator light flash anytime the camera is being viewed remotely, internal on the network, or both? I see it flashes when I access via a hardwired LAN, but I'd also like the option for it to flash when someone from the outside is viewing it remotely.
Basically, steady light = no one viewing. Flashing light = someone, somewhere, viewing. Or maybe even different flash patterns to indicate if being viewed by a remote user or one on the wifi network.
Thanks for considering.
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - LED Control - Option to enable the green LED for local access, remote access, or both and display different flash patterns depending on whether the camera is locally vs remotely accessed
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Please see this request: http://forums.dlink.com/index.php?topic=58758.0
Thank you
-
Please see this request: http://forums.dlink.com/index.php?topic=58758.0
Thank you
Hello,
I've owned a DCS-930L for a while now and only lately I've noticed something bothersome.
I've always viewed the camera from video (ActiveX for example). And anytime I viewed it - the camera LED was blinking. It was the feature that gave me a great feeling of security - If someone was watching my camera and managed to bruteforce the password - at least I'd known they are watching and I could turn the camera off.
I know the chances someone would do that are extremely low, but this feature was the only thing that made me calm and allowed me to freely use the cameras.
So the issue is that I found out it is possible to access the cgi (/image/jpeg.cgi) and view it, and the camera's LED won't blink.
I would like to ask if it is possible to implement a feature that would make the camera blink whenever someone is connected to it at all (such as to any page via the browser)? It would make me, and I bet other users, feel more secure. I'm the only one who has access to the camera so it will make me feel at much ease knowing it will blink when someone else is.
Thank you for your time reading my post. I would be very happy to receive any comment from the D-LINK team or the community.
P.S.
Is the source code of the firmware available somewhere? Or is it completely closed :-[?
Anyway thank you again, I'm happy to see the community here and the available, recent (!) updates ;D
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Daylight savings time support
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - LED Control - Option to enable the green LED for local access, remote access, or both and display different flash patterns depending on whether the camera is locally vs remotely accessed
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Enable LED whenever web UI or .../jpeg.cgi (screenshot) URL is accessed
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Please post a reply if you know of any items in this wishlist that were already addressed in recent firmware updates!
-
Very many thanks for the latest 1.11 firmware - the minimum FTP post interval has completely solved my problems of being swamped with images on motion detection. Congratulations on a job well done.
-
Very many thanks for the latest 1.11 firmware - the minimum FTP post interval has completely solved my problems of being swamped with images on motion detection. Congratulations on a job well done.
I'll pass forward your satisfaction... ;)
-
Please post a reply if you know of any items in this wishlist that were already addressed in recent firmware updates!
I believe the Daylight Savings Time Support was addressed a couple of firmware updates ago. Works on 1.11
....
-
I believe the Daylight Savings Time Support was addressed a couple of firmware updates ago. Works on 1.11
....
Firmware Wishlist updated... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - LED Control - Option to enable the green LED for local access, remote access, or both and display different flash patterns depending on whether the camera is locally vs remotely accessed
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Enable LED whenever web UI or .../jpeg.cgi (screenshot) URL is accessed
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - Daylight savings time support
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
I guess my biggest request would be the WiFi password thing. Good wpa passwords should have spaces and punctuation... so I would request:
wpa password to should allow non alphanumeric characters (such as spaces, commas, apostrophes, periods, questions marks and the like)
-
I guess my biggest request would be the WiFi password thing. Good wpa passwords should have spaces and punctuation... so I would request:
wpa password to should allow non alphanumeric characters (such as spaces, commas, apostrophes, periods, questions marks and the like)
Added to the firmware wishlist... ;)
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - LED Control - Option to enable the green LED for local access, remote access, or both and display different flash patterns depending on whether the camera is locally vs remotely accessed
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Enable LED whenever web UI or .../jpeg.cgi (screenshot) URL is accessed
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Security - Support for special characters in the WPA password
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - Daylight savings time support
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
I wish to win battle with crappy sound like in this video :
http://www.youtube.com/watch?v=wI0qtqMcEL0
-
I wish to win battle with ****py sound like in this video :
http://www.youtube.com/watch?v=wI0qtqMcEL0
It's hard to discern the referenced noise from that video, as most recording devices will pick up some form of ambient noise. :-\
-
FYI. I have two 930L and one 2332L. The mic on the 930L is horrible. The mic on the 2332L is very good.
-
FYI. I have two 930L and one 2332L. The mic on the 930L is horrible. The mic on the 2332L is very good.
If that's the case, then the delta could be a HW issue.
-
Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in green.
If any items in the wishlist were fixed by the latest firmware, please post and I'll update!
DCS-930L Wishlist
- General - Ability to save a user defined default value (ActiveX or Java) for LIVE VIDEO > Camera > FUNCTION
- General - Add control for user language
- General - Add log file generation
- General - Add more detail to status page (e.g. email enabled, ftp enabled, motion detection enabled)
- General - Disable telnet and enable SSH for command line access
- General - Exposure setting dropdown menu with stepwise 0.5 EV unit increments from 02.5 to +2.5 EV
- General - Include more segmentation for the FTP file name date/time suffix: e.g. change "DCS-930L_2011090114562601.jpg" to "DCS-930L_20110901_14562601.jpg" or "DCS-930L_2011.0901.1456.2601.jpg"
- General - LED Control - Option to enable the green LED for local access, remote access, or both and display different flash patterns depending on whether the camera is locally vs remotely accessed
- General - Option to include date and time stamps on captured images
- General - OSD Date/Time with formatting options
- General - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
- General - Time Zone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time
- FTP - Ability to maintain an FTP'd image history for a user defined period (e.g. 24 hours) whereby older images are automatically deleted, ensuring no more than a fixed number of images are maintained on the destination server at any given time
- FTP - FTPS support
- FTP - Maintain open FTP session until all images from the motion detection event are pushed to the server (rather than open/close, open/close, open/close, etc)
- FTP - Option to set a user-defined duration for images to push to an FTP location following a motion detection event (e.g. 3 minutes)
- FTP - Store FTP test file in the folder created by selecting the "Test" option under "TEST FTP SERVER" (selcting "Test" currently creates a new folder and store the FTP test file in the root of the FTP server "Host Name" + "Path", leaving the test folder empty)
- FTP - Test failure messages should display the cause of failure (e.g."server not found", "unknown username", "bad password"); the current messaging "Failed" provides little diagnostic value
- FTP - Test message should appear on the FTP setup page following refresh (currently requires iterating through multiple pages)
- Image - Add ability to rotate image 90 and 270 degrees (in addition to "Flip Image")
- Image - Option to save different settings for Day Mode vs. Night Mode (e.g. contract and brightness)
- Motion Detection - Include a text string in the email notifications indicating the motion detection grid area(s) breached during a motion detection event
- Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
- Motion Detection - Option to FTP images immediately before and after a motion detection event (similar to the current email option)
- mydlink - mydlink registration independent of device configuration wizard
- Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
- Security - Enable LED whenever web UI or .../jpeg.cgi (screenshot) URL is accessed
- Security - Hide pre-shared key (i.e. do not display as plain text)
- Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
- Security - Support for special characters in the WPA password
- Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
- Video - RTSP Streaming (.cgi is not the best solution for protocols like VLC)
- Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner
- Bug - Address the ClassNotFoundException error associated with motion detection and Java (without the need for end users to employ a workaround fix)
Wishlist Items Addressed by D-Link (Thank You!)
- General - Daylight savings time support
- General - User password length too short
- Motion Detection - Motion detection email on a user defined schedule
- Motion Detection - Motion detection FTP on a schedule
- Motion Detection - User defined frame capture rate for motion detection emails and FTP posts (independent of FPS)
- Motion Detection - User defined minimal interval between motion detection FTP posts and emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
- Audio - Resolve intermittent background audio clicking [FIXED!]
- General - Admin password length too short [FIXED!]
- [Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
-
Hi! It would be great to add:
Email Notification - Ability to send email notifications to multiple email addresses.
Regards.