D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: jotarex on July 27, 2008, 10:03:50 AM

Title: dir-655 in bridge mode ?
Post by: jotarex on July 27, 2008, 10:03:50 AM

hi!

Is possible dir-655 running on bridge mode ?
my dir-655 is :
Hardware Version: A3
Firmware Version: 1.20

I want work bridged mode with my adsl router....

Title: Re: dir-655 in bridge mode ?
Post by: smapdi on July 27, 2008, 05:30:10 PM

If you mean bridge via wireless I believe that functionality was taken out after the 1.03 firmware.

If you want to do a wired bridge (using the DIR-655 as a gigabit switch) can be pretty easily done. Just assign the DIR-655 a static IP internally that is outside of the DHCP range of your ADSL router (i.e.: your ADSL router assigns IPs in the range of 192.168.1.100 to 192.168.1.150, make the DIR-655 192.168.1.99) in Setup -> Router Settings. Then just turn off the DHCP server in Setup -> Network Settings.

Title: Re: dir-655 in bridge mode ?
Post by: Lycan on July 28, 2008, 09:55:01 AM

What should be done is bridge the ADSL modem.

Title: Re: dir-655 in bridge mode ?
Post by: jotarex on July 28, 2008, 05:19:24 PM

where i can found 1.03 firmware for A3 hardware ?

Title: Re: dir-655 in bridge mode ?
Post by: smapdi on July 28, 2008, 09:06:58 PM

Quote from: jotarex on July 28, 2008, 05:19:24 PM

where i can found 1.03 firmware for A3 hardware ?

Just like with the 1.20 update there is no going back. It looks like the firmware also updated the Atheros microcode. Sorry to say but I don't think you'll have any luck with wireless bridge unless DLink releases another update that enables this.

Title: Re: dir-655 in bridge mode ?
Post by: fgl30 on July 29, 2008, 06:00:43 AM

If you like to try........

ftp://lizzi555.dyndns.org/Download/WLAN/DLINK/

Title: Re: dir-655 in bridge mode ?
Post by: jotarex on July 29, 2008, 02:20:18 PM

 :D thanks I'll try .....

JP