D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DGL-4500 => Topic started by: dbasnett on July 13, 2010, 05:38:00 AM

Title: Routing - Ping not working
Post by: dbasnett on July 13, 2010, 05:38:00 AM

I am not sure if this is a 4500 problem or not.  I have the following configuration

Code: [Select]

     Internet
        |
        |
        |
       WP*
      -----
     |IRTR |LP*---PC_Lan   .3.2
      -----
        LP*
        |
        |
        |
       WP*   .3.4
      -----
     |WRTR |LP*---DlinkNAS321   .1.5
      -----
       |
       |
       |--))     WIFI     ((--MyPC   .1.10 – WIFI to WRTR


     WP* = Internet / WAN Port
     LP* = LAN Port
    
    
     IRTR – LAN – 192.168.3.0 /24
     WRTR – LAN – 192.168.1.0 /24
    
     IRTR Dlink4500– primary internet access  .3.1
     WRTR Dlink4500– wifi rtr  .1.1
    


IRTR Routing table Destination IP   Netmask   Gateway   Metric   Interface   Creator 10.254.1.1   255.255.255.255   0.0.0.0   1   INTERNET   System 10.0.0.0   255.0.0.0   10. 254.1.1   15   INTERNET   System 0.0.0.0   0.0.0.0   10. 254.1.1   15   INTERNET   System 192.168.1.0   255.255.255.0   192.168.3.4   1   LAN   Admin 192.168.3.0   255.255.255.0   0.0.0.0   1   LAN   System WRTR Routing table Destination IP   Netmask   Gateway   Metric   Interface   Creator 192.168.3.0   255.255.255.0   0.0.0.0   1   INTERNET   System 0.0.0.0   0.0.0.0   192.168.3.1   15   INTERNET   System 192.168.1.0   255.255.255.0   0.0.0.0   1   LAN   System

I can ping from 1.10 to 3.2.  I can not ping from 3.2 to 1.10.  I have checked both PC's for Firewall settings that would block this.