Topic: Pink noise in picture (Read 3389 times)

780user · « **on:** April 07, 2014, 08:29:55 AM »

Yes, suddenly pink noise in the picture from my DCS-6210, not to be mixed with pink audio noise....

Anyone experienced anything like this ? Solution ?

Current firmware 1.00.06

JavaLawyer · « **Reply #1 on:** April 07, 2014, 06:37:45 PM »

Log into the web UI and navigate to SETUP > Image Setup. Does the visual artifacts disappear if you change either the Exposure Mode, Max Gain, or Denoise settings?

780user · « **Reply #2 on:** April 07, 2014, 11:08:53 PM »

Hi. It changes a little bit. Tried "default" settings with no luck. Looks like the overexposed parts turn pink...

JavaLawyer · « **Reply #3 on:** April 08, 2014, 04:29:05 AM »

Quote from: 780user on April 07, 2014, 11:08:53 PM

Hi. It changes a little bit. Tried "default" settings with no luck. Looks like the overexposed parts turn pink...

That's where I was heading as well. I thought perhaps turning down the gain or reducing the exposure would remove the noise.

780user · « **Reply #4 on:** April 09, 2014, 06:48:40 AM »

All settings to default, gain to 0dB. Still same result.

JavaLawyer · « **Reply #5 on:** April 09, 2014, 11:09:57 AM »

Have other DCS-6210 owners (or other models for that matter) observed similar image discoloration?

D-Link Forums

News:

Author Topic: Pink noise in picture (Read 3389 times)

780user

Pink noise in picture

JavaLawyer

Re: Pink noise in picture

780user

Re: Pink noise in picture

JavaLawyer

Re: Pink noise in picture

780user

Re: Pink noise in picture

JavaLawyer

Re: Pink noise in picture