• December 15, 2017, 05:37:09 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Dynamic VLAN assignment on DAP-2360  (Read 6176 times)

globalit

  • Level 1 Member
  • *
  • Posts: 7
Dynamic VLAN assignment on DAP-2360
« on: October 19, 2014, 06:58:20 AM »

Hello All,

I want to perform the dynamic VLAN assignment on my network using 802.1x therefore I get two access points DAP-3310 et DAP-2360 and one RADIUS server. I did the required configuration but it is not working.

Please help me to realize this configuration, and which RADIUS server is preferable to use with D-Link devices

Best regards
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360
« Reply #1 on: October 22, 2014, 07:10:28 AM »

Link>Welcome!

  • What Hardware version is your DAPs? Look at sticker under the DAPs.
  • Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
  • What region are you located?

Is there any information with in the User Manuals to help with this?

If not, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

globalit

  • Level 1 Member
  • *
  • Posts: 7
Re: Dynamic VLAN assignment on DAP-2360
« Reply #2 on: October 22, 2014, 11:06:13 PM »

Thank you for your response

Unfortunately there is nothing important concerning this point in the manual.

Ok I will call the regional support office and I will let you know the results.

Best regards.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360
« Reply #3 on: October 31, 2014, 11:10:03 AM »

Let us know how it goes...
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

globalit

  • Level 1 Member
  • *
  • Posts: 7
Re: Dynamic VLAN assignment on DAP-2360
« Reply #4 on: November 02, 2014, 11:37:53 PM »

Hi everybody,

Yes, DAP-2360 supports dynamic Vlan. It is working on all RADIUS solution as long as it follows RFC standard , in my case I used NPS Network Policy Server of Windows server 2008.

a. Wireless Security



b. VLAN Setting



c. NPS
-tunnel medium type: (802.1x)
-tunnel pvt group id: (Vlan ID)
-tunnel type : (VLAN)




d. Switch config:
Include all the configured Vlan on the ports connecting to the AP  ( eg.  Vlan-1 tagged ; Vlan-2,3,4 Tagged ).


Best regards.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360 (RESOLVED)
« Reply #5 on: November 03, 2014, 08:20:04 AM »

Awesome, glad you found what you needed and go it working. Thanks for the information and feed back. Hope it helps current and future users.  ;)
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

zzandry

  • Level 1 Member
  • *
  • Posts: 2
Re: Dynamic VLAN assignment on DAP-2360
« Reply #6 on: October 16, 2015, 02:07:24 AM »

Hi everybody,
globalit, does your mgmt vlan is also on vlan 1, or it is assigned dynamically by the NPS.

Logged

lemitch

  • Level 1 Member
  • *
  • Posts: 3
Re: Dynamic VLAN assignment on DAP-2360
« Reply #7 on: June 21, 2017, 08:28:03 AM »

Hi,
I use dynamic vlan with DLINK DGS3120 switches. These switches send to the radius server the device mac address, and the devices connected on the host-based interfaces obtains a VLAN number according their mac addreess. It is possible to configure the dynamic vlan on the DAP-2360 (or other) in the same manner ?
Regards
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360
« Reply #8 on: June 21, 2017, 10:10:22 AM »

Link>Welcome!

  • What region are you located?

Something you might check the DGS series users manual for and see. Or phone contact D-Link support.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

lemitch

  • Level 1 Member
  • *
  • Posts: 3
Re: Dynamic VLAN assignment on DAP-2360
« Reply #9 on: June 27, 2017, 08:49:54 AM »

Hi,
Thanks for your anwer, but my question is not for the DGS. That I want, is to reproduce on the DAP the DGS functionalities.
Sorry for my poor english language.
Lemitch
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360
« Reply #10 on: June 27, 2017, 09:00:13 AM »

Does the user manual for the DAP have any information on VLAN?

Some DAPs may not support VLAN capabilities. Something you might ask your regional D-Link support office about. Might need to use a DGS in conjunction with the DAP.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

lemitch

  • Level 1 Member
  • *
  • Posts: 3
Re: Dynamic VLAN assignment on DAP-2360
« Reply #11 on: June 28, 2017, 03:20:26 AM »

For example, with the DAP-2360, I see on the screenshots the ability of dynamic vlan.
When activated, is it possible to send the mac address of the device connected to the  radius server (nps in my case) and read the vlan number in the radius answer (as I use the dynamic vlan in the DGS).
Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Dynamic VLAN assignment on DAP-2360
« Reply #12 on: June 29, 2017, 09:21:46 AM »

Something you might want to contact your regional D-Link support office and ask about...
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting