• March 19, 2024, 12:32:06 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 5222L Rev A Freaking out - Config page shows as 5211  (Read 3833 times)

slvrscoobie

  • Level 1 Member
  • *
  • Posts: 10
5222L Rev A Freaking out - Config page shows as 5211
« on: July 03, 2018, 06:47:06 AM »

Hey Guys,
Ive had my 5222L for years. recently changed over to the 8000 as its easier to see my whole room at once, rather than panning around.
but I was leaving for vacation and decided i wanted to just throw this on my camera list again to use for additional monitoring. took a while to get it back on, as it was still registered on My.Dlink but i had removed it from my app. Ended up hard resetting it, which wasnt working, and finally 'reset to factory' from the config page.
well 2nd day of the trip, it disconnected and was unusable the rest of vacation. Awesome. Got home mid week last week and started messing around with again because i wanted to see what the issue was. but i noticed I couldnt see the wireless page. Weird.
Well I just noticed the product ID or whatever you call it on top of the config page lists it as a DCS-5211!!
apparently thats the non-wireless version.
Ive reloaded the firmware from D-Link twice now, and when it reboots, it keeps coming back with the 5211. Did my Wireless card in the camera fry? I read it has a CPU to function as a standalone 'surveillance station' so maybe the wireless daughter board is dead, and when it loads the firmware it doesnt see a wireless card and installs the 5211 firmware instead??
any way to check / fix this?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 5222L Rev A Freaking out - Config page shows as 5211
« Reply #1 on: July 03, 2018, 09:40:50 AM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What browser are you using? Seen if different browsers?
Does the camera work at all?
How long have you had the camera?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

daigorho

  • Level 1 Member
  • *
  • Posts: 1
Re: 5222L Rev A Freaking out - Config page shows as 5211
« Reply #2 on: November 19, 2018, 11:17:17 PM »

my friend gave me a used DCS-5222L and when I hard-reset it, I found the model shows as "DCS-5211L" in the top left corner when using WEB-GUI and the wireless function gone also. I did flash the DCS-5222L firmware but remains the same. May I know if there is something wrong related to the agent?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 5222L Rev A Freaking out - Config page shows as 5211
« Reply #3 on: November 25, 2018, 12:11:43 PM »

What browser are you using? Do you see this in other browsers as well?
You can try a recovery and see if this might help:
Emergency Recovery Mode

If this fails to bring it back to operation, the camera needs to be replaced.

my friend gave me a used DCS-5222L and when I hard-reset it, I found the model shows as "DCS-5211L" in the top left corner when using WEB-GUI and the wireless function gone also. I did flash the DCS-5222L firmware but remains the same. May I know if there is something wrong related to the agent?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.