• March 28, 2024, 01:47:49 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Not recognizing HDDs in specific, strange way  (Read 2979 times)

pterrydactyl

  • Level 1 Member
  • *
  • Posts: 2
Not recognizing HDDs in specific, strange way
« on: June 12, 2016, 10:27:11 AM »

So I bought a used 323 off ebay, and its not recognizing my HDDs in a strange way. I want to know whether the HDD or NAS is defective.

I have HDD 1 and HDD 2, both 4TB Seagate NAS drives. Whether I put them in 1, 2, or 2, 1, the right HDD light is always amber, but going into the software it always recognizes HDD 1 (and not HDD 2), and correctly identifies which bay it is in. The other strange thing is that the software only recognizes it as a 2199GB drive instead of the 4TB drive that it is.

 So, is HDD 2 broken, or the NAS?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Not recognizing HDDs in specific, strange way
« Reply #1 on: June 12, 2016, 10:31:28 AM »

You could put one of the drives in a PC and see if its recognized there first.
Try a smaller sized drive first to see if the DNS sees it.
Check with the support site on wheather 4Tb drive sizes and models are supported on the DNS. It maybe not supported:
http://forums.dlink.com/index.php?topic=672.0
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

pterrydactyl

  • Level 1 Member
  • *
  • Posts: 2
Re: Not recognizing HDDs in specific, strange way
« Reply #2 on: June 12, 2016, 10:38:01 AM »

Is that list comprehensive? Because my drives aren't on there.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Not recognizing HDDs in specific, strange way
« Reply #3 on: June 12, 2016, 10:41:24 AM »

Pretty to my knowledge...Ya I don't see any drive sizes over 2Tb so I presume that 4Tb may not work.

Try a smaller drive...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: Not recognizing HDDs in specific, strange way
« Reply #4 on: June 14, 2016, 03:16:04 PM »

Depending on firmware level you might have a problem with those disks (remember the unit could be up to 10 years old). I have a memory of someone getting a pair of 3TB drives to work.

The other problem that you might have is the LED drive indicator remaining amber no matter which drive is in the slot.  This could indicate a faulty unit or it could be the disk mounting socket is damaged or has an obstruction (lint, fluff, etc.) causing it to not make good contact.  Also, depending on age, it is possible for the CMOS battery to be at the end of its useful life and that can produce very strange symptoms in the unit.
Logged