D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => WBR-1310 => Topic started by: thenrick on December 29, 2010, 07:15:08 AM
-
I can't find the web interface for my WBR-1310. If I go to:
http://192.168.0.1/
I get my Actiontec Router from Qwest. I tried all the addresses I see when I type arp -a from a command window.
Any suggestions?
Thanks,
Tom
-
the beastie comes out of the box with that IP address you can't have 2 devices with the same IP on your network.
What you will have to do is set up your d-link off your network first and then swap it in and do the final setup then usually with the WAN side disconnected until you are ready.