D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: khizar.uddin on July 28, 2013, 04:47:37 PM

Title: Setting up QOS on D-Link 2750u
Post by: khizar.uddin on July 28, 2013, 04:47:37 PM

I have given an internet connection to my neighbour, he is constantly misusing the bandwidth, please please some one can guide to setup the Qos on my DLink Router or a way to limit his activities, so that I could limit the percentage of bandwidth for him, he is constantly using torrents, somebody help to guide me limit his activities.

Thanks in advance...

Title: Re: Setting up QOS on D-Link 2750u
Post by: FurryNutz on July 29, 2013, 06:57:42 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Is there any QoS information in the User Manual? [/list]

Title: Re: Setting up QOS on D-Link 2750u
Post by: khizar.uddin on July 29, 2013, 01:27:08 PM

Please find the details below. As I cannot get to the sticker, its way too high mounted by the vendor, I am in UAE.

BoardID:    DSL-2750U
Software Version:    ET_1.00
Bootloader (CFE) Version:    1.0.37-106.5
DSL PHY and Driver Version:   A2pD030g.d23h
Wireless Driver Version:    5.60.120.3.cpe4.406.0

Title: Re: Setting up QOS on D-Link 2750u
Post by: FurryNutz on July 29, 2013, 01:38:20 PM

I recommend that you phone contact your regional D-Link support office and ask for level 2 or higher support:
http://www.dlinkmea.com/site/index.php/site/support (http://www.dlinkmea.com/site/index.php/site/support)
 and have them help you configure the modem for QoS so that you have priority and your neighbor who has access gets less priority. If the modem doesn't have any QoS to configure, then you might consider bridging this modem and install and connect a DIR series external router that does have QoS features as seen the following sticky:
Gaming and QoS for XBL (http://forums.dlink.com/index.php?topic=42011.0)

Title: Re: Setting up QOS on D-Link 2750u
Post by: khizar.uddin on July 29, 2013, 01:42:22 PM

Thanks Bro, I have already done some testing by the same thread yesterday, but will definitely give DLink guys a call here for the level 2 support. But its weird there is no tutorial or guide for Qos for Dlink routers...
:(

Poor documentation...

Title: Re: Setting up QOS on D-Link 2750u
Post by: FurryNutz on July 29, 2013, 01:51:59 PM

Ya, Seen this with other Mfrs as well. Don't know why QoS isn't detailed more however could be due to the various ways it can be used. It took me a while before I understood some of it and a while before finding my initial information years ago and what everyones experiences have been with this. The sticky has been a culmination of everything over time. It's same principle as the DIR series, however the DSL modems have different UI and some other features that I presume that could be different.

Hope it works out. Keep us posted.