D-Link Forums
D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: mbider on July 03, 2014, 04:55:23 PM
-
Hello
This after spending several days in trying to solve my problem, not having found a solution I come here to ask for help.
I bought a new modem to the store its a DSL-2750U H / W C1 F / M ME_1.10
I connected and configured as usual
Perfect connection (attached Device info)
This information reflects the current status of your WAN connection.
Line Rate - Upstream (Kbps): 450
Line Rate - Downstream (Kbps): 11552
LAN IPv4 Address: 192.168.1.1
MAC Address: here adress MAC
Default Gateway: ppp0
Primary DNS Server: 109.0.66.10
Secondary DNS Server: 195.186.4.111
My problem is that I can not seem to connect any computer in the house
After several attempts I realized that the DNS router does not work
By entering the DNS (primary and secondary) manually in the configuration of the network card in the computer everything works normally.
I used several firmware without success (ME_1.30, MEGE_1.00 Russian firmware: 1.0.11 and 1.0.14) still the same problem.
I tried to see several configuration settings but I could not notice any parameter related to the operation of the DNS.
I am not a professional but I know the configuration needed to get out.
That's if anyone can help me it will make me a great service
-
You may have a bad unit,
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
-
thank you very much
I live in Algeria
I do not know how to contact the regional office support D-Link
-
http://www.dlinkmea.com/site/index.php/site/support (http://www.dlinkmea.com/site/index.php/site/support)
-
Thank you for the link
but impossible to have a direct contact
I preferred make the modem to store
-
Good Luck.
-
A wild guess - try enabling 'DNS Proxy' under 'Advanced setup' on your router configuration page.