Topic: DNS-320 nor reachable (Read 2002 times)

cappy0815 · « **on:** January 18, 2017, 11:06:58 PM »

Hey guy,

my DNS-320 is not reachable after a powerloss.
Immediately after startup the webinterface ist reachable but it is not possible to log in.
After aprox. a minute it is not reachable anymore.
It is not possible to establish a ftp, web, etc connection.
But the device is connected to my DHCP and it is possible to ping it.
It is running in RAID1 mode.

What happens with my HDD data if I reset the NAS and how is it possible?
What happens with my HDD data if I get a new DNS-320 and switch the disk to a new system?

What are your recommendations?

Thank yo uvery much
Cappy

FurryNutz · « **Reply #1 on:** January 19, 2017, 01:48:44 PM »

What Hardware version is your DNS? Look at the sticker behind or under the device.
Link>What Firmware version is currently loaded? Found on the DNSs web page under status.
What region are you located?

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.30 or .20

D-Link Forums

News:

Author Topic: DNS-320 nor reachable (Read 2002 times)

cappy0815

DNS-320 nor reachable

FurryNutz

Re: DNS-320 nor reachable