• March 28, 2024, 02:21:43 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSL-2750U CANNOT FIND PRINT SERVER IN FIRMWARE  (Read 10463 times)

irfan.aslam

  • Level 1 Member
  • *
  • Posts: 1
DSL-2750U CANNOT FIND PRINT SERVER IN FIRMWARE
« on: September 09, 2013, 05:56:18 AM »

Hi,
The only reason I bought this router was for printer sharing over the wifi and now after playing with it for a few hours trying to upgrade/downgrade the firmware because I can find multiple forums/websites explaining how to setup print server but there is no option of that in my firmware. Details of the device are as below
Firmware Version:ME_1.09
DSL-2750U
can any one help?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSL-2750U CANNOT FIND PRINT SERVER IN FIRMWARE
« Reply #1 on: September 09, 2013, 07:13:43 AM »

I believe that DSL Modems are just that, modems and don't have any print server features. If you have a LAN based printer it can be used on the modem and set up as a IP address to print to. For USB based only printers you'll need a actual printer server device for that which could be connected to the DSL Modem.

I recommend that you phone contact your regional D-Link support office and inquire about Print Servers and what they offer that could help you.

Good Luck.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

kekboo

  • Level 1 Member
  • *
  • Posts: 1
Re: DSL-2750U CANNOT FIND PRINT SERVER IN FIRMWARE
« Reply #2 on: October 06, 2017, 07:32:45 AM »

i figured out print server in dlink dsl-2750U  firmware: ME_1.10,  h/w model: v1
step 1 update the firm ware from dlink ftp site
ftp://ftp.d-link.co.za/DSL/
step 2 enable print server from advanced>network tools> printer
step 3 give a name to your printer and select apply
step4 reboot the device.

screen shot is attached. your print server looks like this.
now add the network printer in your pc.

tada done:[/img][/img]
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSL-2750U CANNOT FIND PRINT SERVER IN FIRMWARE
« Reply #3 on: October 06, 2017, 11:14:53 AM »

Thank you for letting us know about the PS feature on the 2750U. Hope it helps future users.

i figured out print server in dlink dsl-2750U  firmware: ME_1.10,  h/w model: v1
step 1 update the firm ware from dlink ftp site
ftp://ftp.d-link.co.za/DSL/
step 2 enable print server from advanced>network tools> printer
step 3 give a name to your printer and select apply
step4 reboot the device.

screen shot is attached. your print server looks like this.
now add the network printer in your pc.

tada done:[/img][/img]
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.