Topic: Firmware updates resets config?? (Read 4792 times)

netatwork · « **on:** November 23, 2009, 09:54:44 AM »

Hi there,

A client of mine has 8 DES-1228 switches. He was having random issues with switch ports locking up so I figured I'd try the newest firmware (1.11.01). The firmware installed just fine on the first switch, except that it completely wiped out the configuration. Luckily I had the config backed up so I could easily restore things, but this was very impractical as the management IP is on a VLAN, so I to go the closet where the switch was to restore the config. Is this normal? It'll make upgrading the firmware on the rest of the switches very impractical.

Thanks.

Fatman · « **Reply #1 on:** November 23, 2009, 09:59:19 AM »

I believe this may depend on how many versions you are jumping. If you apply the firmware sequentially, do you see this problem?

netatwork · « **Reply #2 on:** December 07, 2009, 07:37:21 AM »

I didn't jump any. I went from 1.10.12 to 1.11.01. Has anyone else had this happen to them?

Fatman · « **Reply #3 on:** December 07, 2009, 11:14:50 AM »

I do not personally know of this happening to anyone else.

poyicameo · « **Reply #4 on:** June 07, 2010, 08:30:41 AM »

Hi, netatwork

I suggest you can use D-Link SmartConsole utility to upgrade firmware to all DES-1228 at the same time in discovery mode even all DES-1228 IP address is the same. Thanks a lot.

Poyi

D-Link Forums

News:

Author Topic: Firmware updates resets config?? (Read 4792 times)

netatwork

Firmware updates resets config??

Fatman

Re: Firmware updates resets config??

netatwork

Re: Firmware updates resets config??

Fatman

Re: Firmware updates resets config??

poyicameo

Re: Firmware updates resets config??