• December 03, 2021, 09:34:19 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DLink DSM-750 IR Remote Control Codes  (Read 10635 times)

shazlett

  • Level 1 Member
  • *
  • Posts: 3
DLink DSM-750 IR Remote Control Codes
« on: June 04, 2009, 09:58:22 AM »

Can someone verify that the IR codes the DSM-750 remote control uses is the same as the Media Center Remote control? I have a RTI Master Remote Control and want to simulate the DSM-750 on it for my Home Theatre system. If not where can I get the IR codes or ****to codes?
Thanks :)
Logged

Arvald

  • Level 3 Member
  • ***
  • Posts: 108
Re: DLink DSM-750 IR Remote Control Codes
« Reply #1 on: June 04, 2009, 10:44:30 PM »

I was using the DSM750 remote and it managed to access a lot of the media center functions on my wifes laptop.
the flip side of using her media center remote on the 750 did not work very well at all.

Logged

ECF

  • Poweruser
  • Level 11 Member
  • *
  • Posts: 2692
Re: DLink DSM-750 IR Remote Control Codes
« Reply #2 on: June 05, 2009, 10:46:57 AM »

The DSM-750 uses the RC-6 protocol.

Every MCE remote made should works with the DSM-750 for playback, menu navigation, etc. (except the special MediaLounge buttons added to the remote).
Logged
Never forget that only dead fish swim with the stream

shazlett

  • Level 1 Member
  • *
  • Posts: 3
Re: DLink DSM-750 IR Remote Control Codes
« Reply #3 on: June 05, 2009, 11:06:15 AM »

ECF,
Do you know where i can get the IR Codes or ****to Codes for the DSM-750 Remote?
I have the IR Codes for the Microsoft Media Center remote but not the DSM-750 specifically. Sure would love to get them so I can import them into my Master RTI T1 Remote.
Thanks
Logged

live_strong

  • Level 1 Member
  • *
  • Posts: 9
Re: DLink DSM-750 IR Remote Control Codes
« Reply #4 on: June 22, 2009, 12:52:07 PM »

i just purchased a bose lifestyle v20 system.  it comes with a RF remote which can be used to control five devices.  is it possible to use the bose remote to control the dsm 750
Logged

rob_t

  • Level 2 Member
  • **
  • Posts: 38
Re: DLink DSM-750 IR Remote Control Codes
« Reply #5 on: June 30, 2009, 12:30:53 AM »

i just purchased a bose lifestyle v20 system.  it comes with a RF remote which can be used to control five devices.  is it possible to use the bose remote to control the dsm 750

If I'm understanding you right, I think the answer is "no". The DSM-750 used IR (infra red) not RF (radio) for the remote.
Logged

Arvald

  • Level 3 Member
  • ***
  • Posts: 108
Re: DLink DSM-750 IR Remote Control Codes
« Reply #6 on: July 02, 2009, 08:45:27 PM »

If I'm understanding you right, I think the answer is "no". The DSM-750 used IR (infra red) not RF (radio) for the remote.
unless it has an IR relay.
Logged

live_strong

  • Level 1 Member
  • *
  • Posts: 9
Re: DLink DSM-750 IR Remote Control Codes
« Reply #7 on: July 02, 2009, 11:21:26 PM »

my understanding is the RF signal goes to bose lifestyle system then is transfered via IR to the device.  i am about the control my blu-ray and tv (both IR) using the bose remote.  i am just unable to find the d-link 750 in the device list.  is there a code that is associated with the d-link 750 what would allow another IR remote to control it?
Logged

shazlett

  • Level 1 Member
  • *
  • Posts: 3
Re: DLink DSM-750 IR Remote Control Codes
« Reply #8 on: July 03, 2009, 07:04:42 AM »

I have the IR code set for the DSM-750, but they are specific for a RTI T-1 Master remote controller. If these would help you can post your email address and I can send them to you.
Logged

agalloway

  • Level 1 Member
  • *
  • Posts: 2
Re: DLink DSM-750 IR Remote Control Codes
« Reply #9 on: November 14, 2021, 08:03:37 AM »

@ge remote codes I use Philips universal remote controls, exclusively. I have never found the Philips-Magnavox universal remote control code for the Magnavox 15" LCD TV. It was sold just a few months before broadcast TV went digital, and it has an analog tuner. That's not the problem. I have a whole assortment of P-M universal remote controls, but none of the listed codes operate this little TV. I have taken up this task many times before, and I remember a few facts from previous attempts. This Tv may actually respond to code for another brand. I'm fairly sure the IR sensor is working. I just looked up the remote control for this TV, and it has a custom-made remote available for sale. Does anyone have experience with this TV? Does anyone know the Philips universal remote control code for this TV?

Magnavox 15" LCD TV 15MF400T/37
« Last Edit: November 15, 2021, 03:19:35 AM by agalloway »
Logged