• May 16, 2022, 05:15:12 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D-LINK DIR-600M LOST INTERNET CONNECTION  (Read 9016 times)

Ehsan habib

  • Level 1 Member
  • *
  • Posts: 4
D-LINK DIR-600M LOST INTERNET CONNECTION
« on: April 30, 2015, 08:13:17 AM »

I have a dlink dir-600m wifi router...When i connect it with the internet it works well.but after some minutes it lost internet connectivity in lan and wifi..when i restart the router it again connect with the internet,then it lost internet connectivity again.I performed reset many times but nothing works.my router config 
Model- D-link DIR-600M
Hardware version-C1
F/W Ver-3.01
Country-India
Isp-Siti Broadband
Internet type-Static ip,,Cable
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49906
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #1 on: April 30, 2015, 08:23:30 AM »

Link>Welcome!

  • Are you wired or wireless connected to the router?
  • Has a Factory Reset been performed?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process


Internet Service Provider and Modem Configurations
  • What ISP Modem Mfr. and model # do you have?
  • What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites
  • By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.
  • Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
  • Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values

I recommend that you have your ISP check the cabling going to the ISP modem, check signal levels going to the ISP modem. For DSL or Fiber service lines, ensure that the ISP is using good working phone or cable lines to the DSL modem and that the phone lines are filtered correctly. For cable Internet, RG-6 coaxial cable is needed, not RG-59. Check for t.v. line splitters and remove them as they can introduce noise on the line and lower the signal going to the ISP modem. I recommend having the ISP service physically check the lines going from the out side to the ISP modem. Connecting to the ISP modem could result in a false positive as the signal to the modem could be just enough to that point then adding on a router, could see problems. The router operation is dependent upon getting good data flow from the ISP modem and the modem is dependent upon getting good signal from the ISP Service.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Ehsan habib

  • Level 1 Member
  • *
  • Posts: 4
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #2 on: April 30, 2015, 08:34:33 AM »

I already tried factory reset...i got the router with latest firmware..can you please give latest firmware of dlink  dir-600m router ?? my isp spped is 1.5 mbps..i check all the cable are workng fine..i connect my broadband cable directly into my laptop and it works fine,,,so the problem is with the router
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49906
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #3 on: April 30, 2015, 08:40:38 AM »

  • What ISP Modem Mfr. and model # do you have?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
  • Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options, Advanced/QoS.
  • Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
  • Enable or Disable Use Unicasting (compatibility for some ISP DHCP Servers) and test under Setup/Internet/Manual. Disable may help with speed performance on higher speed ISP services.
  • Turn off DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench and input new DNS addresses under Setup/Internet/Manual.
  • Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
  • Ensure devices are set to auto obtain an IP address.
  • If IPv6 is an option on the router, select Local Connection Only under Setup/IPv6.
  • Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
  • Turn off WISH, and WPS under Advanced.
  • WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
  • Set current Time Zone, Date and Time. Use an NTP Server feature. The DST setting is only needed in the NA region. Tools/Time.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Ehsan habib

  • Level 1 Member
  • *
  • Posts: 4
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #4 on: April 30, 2015, 08:43:33 AM »

Tried alll the things... but nothing.. i wanna restore firmware on the router.can i have the firmware ???.my isp router is jupiter networks..
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49906
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #5 on: April 30, 2015, 08:48:23 AM »

If this router is provided by your ISP or, owned and maintained by Jupiter Networks, they may be the ones to contact if they maintain and develop FW for this model HW. Even thought it may say D-Link on the unit, some ISPs maintain and develop FW for D-Link HW. You'll need to contact them and talk with them about FW and help and information regarding this. Putting OEM FW on it may cause problems or violate ISP use policies. Ask first about this.

If you need additional help and information, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email. We do not have FW resources here in the forums.
http://www.dlink.co.in/corporate/contact/

Let us know how it goes please.
« Last Edit: April 30, 2015, 09:02:13 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Ehsan habib

  • Level 1 Member
  • *
  • Posts: 4
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #6 on: April 30, 2015, 08:51:22 AM »

nop my router is not provided by my isp... i just tell you what my isp use as their router...the router is completly mine...
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49906
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: D-LINK DIR-600M LOST INTERNET CONNECTION
« Reply #7 on: April 30, 2015, 08:56:57 AM »

Ok just making sure.

I recommend contacting your regional D-Link support office and ask about FW. I don't see any FW listed on there web site so I don't know where it would be located, if there is any: http://www.dlink.co.in/products/?pid=DIR-600M

Run thru the suggestions and see if anything helps. If not, and if any FW can be found and updated and you still exhibit problems with the router, then the router maybe faulty and would need to be RMAd or replaced.

Please use this for doing any FW updates:
 FW Update Process
« Last Edit: April 30, 2015, 09:04:36 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.