• December 07, 2021, 10:54:16 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Slow wireless performance while on 5GHz?  (Read 31187 times)

jackles

  • Level 1 Member
  • *
  • Posts: 3
Slow wireless performance while on 5GHz?
« on: February 20, 2014, 08:47:51 AM »

I recently purchased a brand new unit and set it up last night. While the 2.4 Ghz wireless is working flawlessly (~25/5 down/up), the 5 Ghz on the other hand has been experiencing very slow download performance (6/5). I have tried toggling on/off encryption and using different ciphers (no difference). I have tried out the different 802.11 options (ac/n/b, n-only, ac/n) - no difference. I tried flashing to the latest firmware (1.02) - also no difference.

I don't see unusually high interference in my neighborhood (maybe about 5 other SSID, at least those that are visible).

I'm not sure if this is a misconfiguration or a defective unit. Anyone have suggestions of what I could try (or should I simply bring it back to exchange)?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49868
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow wireless performance while on 5GHz?
« Reply #1 on: February 20, 2014, 09:02:40 AM »

Link>Welcome!

Congrats on being the first poster for this model.

  • What region are you located?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
FW Update Process


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • What ISP Modem service link speeds UP and Down do you have?

 
Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • What wireless devices do you have connected?
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
  • If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.

What wireless device are you using to test the 5Ghz?
If this device has drivers, ensure that the drivers are up to date. Refer to the adapters Mfr web site for information and help on any configuration or settings to optimally use the 5Ghz, N and AC modes.

Test with a different device on 5Ghz to see if the problem persists.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
6" minimum safe distance between devices.

3rd Party Security Software Configurations
  • Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
  • Turn off all devices accept for one wired LAN PC while testing.
  • Disable any downloading client software managers, i.e. Torrents or similar.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

jackles

  • Level 1 Member
  • *
  • Posts: 3
Re: Slow wireless performance while on 5GHz?
« Reply #2 on: February 20, 2014, 03:03:59 PM »

Thanks for the welcome.

Here's the answers...
    What region are you located?

>> On the west coast

    Was a Factory Reset performed before and after any firmware updates then set up from scratch?

>> No. However, the unit was new in the box and I did not make any advance configurations other than the basics to connect to the WAN and setup the wireless.

    What ISP Service do you have? Cable or DSL?

>> Cable - Comcast

    What ISP Modem Mfr. and model # do you have?

>> Motorola SB6121 modem

    What ISP Modem service link speeds UP and Down do you have?

>> 25/5

Ensure the default (dlink) SSID name is changed.

>> Done

What security mode are you using?

>> WPA-Personal. WPA2/AES Only. Have also tried Auto TPIK and AES, as well as turning off sec altogether (made no difference).

What wireless devices do you have connected?

>> iOS, Android, Windows, Mac - all experience slow downloads when on 5 GHz (test w/ speedtest.net)

Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?

>> No

Test with a different device on 5Ghz to see if the problem persists.

>> iOS, Android, Windows, Mac - all experience slow downloads when on 5 GHz (test w/ speedtest.net)

Turn off all devices accept for one wired LAN PC while testing.

>> The issue I am experiencing is with 5GHz wireless. Wired is working fine as well as 2.4 GHz (both seeing about the same throughput).

Disable any downloading client software managers, i.e. Torrents or similar.

>> Don't use.
Logged

jackles

  • Level 1 Member
  • *
  • Posts: 3
Re: Slow wireless performance while on 5GHz?
« Reply #3 on: February 20, 2014, 08:54:32 PM »

The only advanced options that I found were:
  • WLAN Partition
  • HT 20/40 Co-existence

…which I tried toggling on/off each but made no difference.

Btw, under 5Ghz, Ch 11 is not an option (starts at ch 36 - only 2.4 has ch 11). But in any case, I did try to hard-set different channels which made no difference.

I have used NetStumbler in the past for Windows but that stopped working in 7 and I haven't found a similar tool for Macs- not free anyway. Any recommendations?

As for placement, not near other equipment and 2.4 GHz is fine for 802.11g/n so don't suspect interference is at play (also worth mentioning I've got my laptop/tablet smack dab next to it during the test and getting poor performance).
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49868
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow wireless performance while on 5GHz?
« Reply #4 on: February 22, 2014, 10:48:39 AM »

I would either phone contact D-Link support on the phone and ask about this or return for another unit.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49868
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow wireless performance while on 5GHz?
« Reply #5 on: March 10, 2014, 11:35:39 AM »

Any status on this?  ???
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

bigchungusmasterv2

  • Level 1 Member
  • *
  • Posts: 3
Re: Slow wireless performance while on 5GHz?
« Reply #6 on: October 27, 2020, 07:13:51 AM »

I found the solution after days of testing.

Same problem. Slow 5Ghz performance, while 2.4Ghz and LAN cable works perfect.
With 5Ghz I was getting only 10Mbps download. With 2.4Ghz 40Mbps and LAN is 200Mbps. My ISP is 200Mbps,

I am on European version.
D-Link DIR-842 Wireless AC1200 MU-MIMO Dual-Band Router
Current Firmware Version:   2.02
Current Firmware Date:   2016-06-14


What you need to do to fix 5Ghz issue is to change some settings through admin panel. So just login to D-LINK admin page and update the settings I will list below.


1) Settings >> Wireless >> 5GHz
802.11 Mode: 802.11ac only
Wi-Fi Channel:   Auto
Transmission Power: High
Channel Width: Auto 20/40/80 Mhz

2) Settings >> Wireless >> WI-FI PROTECTED SETUP
PBC: DISABLED
PIN: DISABLED

3) Settings >> Wireless >> Guest Zone
2.4GHz and 5GHz DISABLED!

4) Settings >> Network >> Advanced Settings
IPv4 Multicast Streams: DISABLED
IPv6 Multicast Streams: DISABLED


5) Management >> System Time >>Automatic Time Configuration.
Update Time Using an NTP server: DISABLED

After updating settings restart the router and 5Ghz will score 200Mbps download now instead of 10Mbps.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49868
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Slow wireless performance while on 5GHz?
« Reply #7 on: October 27, 2020, 07:26:32 AM »

What happens if you re-enable IPv4 Multicast Streams? I highly doubt that this will impact 5Ghz performances...
I found the solution after days of testing.

Same problem. Slow 5Ghz performance, while 2.4Ghz and LAN cable works perfect.
With 5Ghz I was getting only 10Mbps download. With 2.4Ghz 40Mbps and LAN is 200Mbps. My ISP is 200Mbps,

I am on European version.
D-Link DIR-842 Wireless AC1200 MU-MIMO Dual-Band Router
Current Firmware Version:   2.02
Current Firmware Date:   2016-06-14


What you need to do to fix 5Ghz issue is to change some settings through admin panel. So just login to D-LINK admin page and update the settings I will list below.


1) Settings >> Wireless >> 5GHz
802.11 Mode: 802.11ac only
Wi-Fi Channel:   Auto
Transmission Power: High
Channel Width: Auto 20/40/80 Mhz

2) Settings >> Wireless >> WI-FI PROTECTED SETUP
PBC: DISABLED
PIN: DISABLED

3) Settings >> Wireless >> Guest Zone
2.4GHz and 5GHz DISABLED!

4) Settings >> Network >> Advanced Settings
IPv4 Multicast Streams: DISABLED
IPv6 Multicast Streams: DISABLED


5) Management >> System Time >>Automatic Time Configuration.
Update Time Using an NTP server: DISABLED

After updating settings restart the router and 5Ghz will score 200Mbps download now instead of 10Mbps.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.