• March 28, 2024, 09:46:04 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Using DAP-1522 as wired AP to a DIR-655  (Read 3045 times)

a94marbo

  • Level 1 Member
  • *
  • Posts: 1
Using DAP-1522 as wired AP to a DIR-655
« on: May 16, 2010, 12:01:21 AM »

Hi am I trying to extend my wireless net work to the basement, and no wireless bridging is possible due to the concrete floor absorbing the signal between the router and AP. That’s why I need to use a wired connection between the two devices.

I want to the following setup.


Is this possible and what information to I need to input in the routing table in the router to make it work. (i.e. to use the printer, network drive from both networks) The wireless devices should be able to connect to either the router or the AP.
Logged

Pamela_TS

  • Level 1 Member
  • *
  • Posts: 16
Re: Using DAP-1522 as wired AP to a DIR-655
« Reply #1 on: May 17, 2010, 04:55:47 PM »

Should work fine; no entries in routing table needed. I would use a different SSID and channel though to avoid potential signal conflicts at/near the transition point.

This is not really different than how I initially used a DAP-1522 to add 5Ghz to a DIR-655
Logged
SpeedStream 4100/DIR-825b fw2.03NA/DAP-1522 (a1) fw1.21 (2 bridge)