D-Link Forums

D-Link IP Cameras for Business => DCS-4802E => Topic started by: bengos on August 04, 2020, 08:13:27 AM

Title: DCS-4802E All Network Ports are closed
Post by: bengos on August 04, 2020, 08:13:27 AM

I have a network issue with a DCS-4802E IP Camera (latest firmware installed). The camera is set with a fixed IP address. Just after booting the device, the web configuration interface is accessible from the LAN and through port forwarding but after a couple of minutes the access is "closed". I did a scan of the opened port with NMAP. All ports are closed (including 80). However, the camera continues to respond to the ping.

The only way to work around is a power OFF/ON cycle. Again and again, the ports are closing quickly.

Any idea to fix it? Thanks

Title: Re: DCS-4802E All Network Ports are closed
Post by: RYAT3 on August 18, 2020, 01:31:16 PM

I have the 4605-EV and your f/w should be similar.

You have to turn it on.

https://i.postimg.cc/T25MfQ3y/46705ev.png


(https://i.postimg.cc/XXWDgfF3/46705ev.png) (https://postimg.cc/XXWDgfF3)