D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-934L => Topic started by: FurryNutz on November 10, 2016, 12:28:44 PM
-
D-Link posted DCS-934L Rev A firmware version v1.05 Build 04, which can be downloaded here: DCS-934L (http://support.dlink.com/productinfo.aspx?m=DCS-934L)
Problems Fixed
1. Fixed an issue that Mydlink service will be off line when FW upgrade to v1.04.15.
New Features
1. Upgrade mydlink agent to 2.1.0-b41
- Network Cameras - Important Posts & Information (http://forums.dlink.com/index.php?topic=58121.0)
- Network Cameras - Beta Firmware Terms and Conditions (http://forums.dlink.com/index.php?topic=47672.0)
- Network Cameras - Why Have Multiple Hardware Versions for the Same Model? (http://forums.dlink.com/index.php?topic=57627.0)
Please post your comments and observations as a reply to this thread.
:) ;) :)
-
This doesn't seem to fix the camera's going offline. In fact my camera's worked fine until I installed this version and now they go offline non stop. They work on the local LAN but not through the cloud service.
-
http://forums.dlink.com/index.php?topic=65861.msg276389#msg276389 (http://forums.dlink.com/index.php?topic=65861.msg276389#msg276389)
This doesn't seem to fix the camera's going offline. In fact my camera's worked fine until I installed this version and now they go offline non stop. They work on the local LAN but not through the cloud service.
-
I have two 934's, two 930's and one 2332.
I just upgraded one of my 934's to FW 1.05 from 1.03 and chrome will not connect to it. I have never had an issue before this firmware. Did this update kill chrome access? My other 934 that is still on 1.03 works fine with chrome as do all my other cameras.
-
Did you clear browser caches then exit Chrome then reopen and then try to access the camera?
I presume your connecting to the local IP address for the camera? Or mydlink.com?
Does IE11 or FF connect to this camera?
I have two 934's, two 930's and one 2332.
I just upgraded one of my 934's to FW 1.05 from 1.03 and chrome will not connect to it. I have never had an issue before this firmware. Did this update kill chrome access? My other 934 that is still on 1.03 works fine with chrome as do all my other cameras.
-
Yes I cleared the cache and restarted Chrome (Chrome is not running in background). Also unplugged the camera for 1 minute. Everything is being done on the local network direct to the camera via ip address and port.
Yes FF connects.
The reason I even did the upgrade was because at some point both my 934's stopped FTPing to my server and I was trying to figure out why (still can't figure that one out).
-
Google is blocking some plug-ins so when you updated, the code in the FW maybe at odds with Chrome.
I would use IE11 or FF to manage the camera.
IF FTP was working and you didn't change anything on the camera, might be something else where...Is this the only camera that FTPs?
-
Ok not sure if I'll roll back FW or just use FF to manage. After all I'm not using the management tools very often.
My 930's can FTP no problem. Both my 934's show invalid username/password.
Should I start a different thread instead of clogging this one?
-
I would check the credentials you entered in. If your getting a username or password, something isn't right. It's probably not Fw. More like configuration. Double check. If you need more help start a new post.
Ok not sure if I'll roll back FW or just use FF to manage. After all I'm not using the management tools very often.
My 930's can FTP no problem. Both my 934's show invalid username/password.
Should I start a different thread instead of clogging this one?
-
Thx. Finally figured it out. IP's added to autoblock on my server.
-
Glad you got it figured out. Enjoy. ;)
-
In the next firmware update for934L I hope they add h.264 or h.265 compression, mjpeg just takes up too much bandwidth.
DCS-934L v1.05 California US
-
I presume that since the 934L is getting to be a bit old, any new feature requests will not be forthcoming unless there a security issue.