D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-510L => Topic started by: young dui on January 19, 2018, 06:32:59 PM

Title: how to enable static ip on 510L any advice.
Post by: young dui on January 19, 2018, 06:32:59 PM

I wanted to configure static on device any suggestions especially since it is for public places still good and cool to enable cant wait to post success with doing so tell me what your attempts came up with.



Young dui

Title: Re: how to enable static ip on 510L any advice.
Post by: FurryNutz on January 20, 2018, 11:06:36 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Have you reviewed the use manual to see if a Static IP address can be set up and supported?

Title: Re: how to enable static ip on 510L any advice.
Post by: young dui on January 20, 2018, 12:31:57 PM

hello dude my router is the notorious DIR 510L share port go.


I want to enable a static option in tuff times in word let me know?

Title: Re: how to enable static ip on 510L any advice.
Post by: FurryNutz on January 20, 2018, 02:00:59 PM

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Have you reviewed the use manual to see if a Static IP address can be set up and supported?