The Graveyard - Products No Longer Supported > DIR-825
300Mbps on 802.11n 2.4Ghz
SBMongoos:
Is there a way to get this 300Mbps without having to buy DLink WiFi adapters? I can get it done on the 5Ghz band but not the 2.4Ghz. I hit 130Mhz max on 2.4Ghz.
pcjunky:
Make sure channel width is set to auto 20/40 MHz.
If that doesn't do it then you might have to set a fixed channel that as clear space around it to allow 40Mhz. You can use inSSIDer from metageek.net to check for less crowded wifi channels around you.
FurryNutz:
Make sure your devices can support the 300Mb on 2.4Ghz as well. ::)
SBMongoos:
--- Quote from: pcjunky on October 14, 2011, 08:32:03 AM ---Make sure channel width is set to auto 20/40 MHz.
If that doesn't do it then you might have to set a fixed channel that as clear space around it to allow 40Mhz. You can use inSSIDer from metageek.net to check for less crowded wifi channels around you.
--- End quote ---
This is what I'm doing. Still hitting 130Mpbs. inSSIDer is a great tool. It shows 2.4 and 5 at 300(N) on my laptop. But only connecting at 300 to 5Ghz.
I have the Intel Centrino Avdvanced-N 6250 AGN WiFi card on the laptop.
FurryNutz:
It's possible that your device might not support 300 Mb connection on 2.4Ghz. I presume you have the 2.4Ghz radio set for single mode N only?
Navigation
[0] Message Index
[#] Next page
Go to full version