D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-935L => Topic started by: zauzaupt on March 10, 2017, 03:36:40 PM
-
cant seem to find any info in this forum regarding this equipment.
im trying to acess device with browser but no sucess, can anyone help?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your DCS? Look at the sticker behind or under the camera.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DCSs web page under status.
- What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using?
Is the camera LAN wire connected to the main host router? If so, look at the host routers client table to see the IP address for the camera there. Use that IP address to get to the cameras web UI in a browser.
-
Looks like a UK version of the same camera.
http://www.dlink.com/uk/en/products/dcs-935lh-mydlink-home-monitor-hd (http://www.dlink.com/uk/en/products/dcs-935lh-mydlink-home-monitor-hd)
-
Any status on this? ???
cant seem to find any info in this forum regarding this equipment.
im trying to acess device with browser but no sucess, can anyone help?
-
(http://imgur.com/a/eDxU9)
The only way I can access cam is with homeapp
-
It will be on your network somewhere and you will be able to browse to it. You just need to find the IP address.
-
It will be on your network somewhere and you will be able to browse to it. You just need to find the IP address.
I don't think that is possible with these "H" models. There isn't even a camera user manual at the link you provided showing the camera's webpages F/W access.
I think these HOME models are different.
Do you have an H model and can access the camera's webpages F/W?
-
What region are you located?
What Mfr and model is the main host router?
Is the camera LAN wire connected to the main host router? If so, look at the host routers client table to see the IP address for the camera there. Use that IP address to get to the cameras web UI in a browser.
(http://imgur.com/a/eDxU9)
The only way I can access cam is with homeapp
-
It will be on your network somewhere and you will be able to browse to it. You just need to find the IP address.
I don't think that is possible with these "H" models. There isn't even a camera user manual at the link you provided showing the camera's webpages F/W access.
I think these HOME models are different.
Do you have an H model and can access the camera's webpages F/W?
It will be connected to your router and you will be able to browse to it. Trust me. You need to log into your router and look at the client list. It will be there. Then browse to that IP address.
Here is the datasheet showing it has an HTTP server.
http://www.dlink.com/uk/en/-/media/consumer_products/dcs/dcs-935lh/datasheet/dcs_935lh_datasheet_en.pdf
-
Any status on this? ???
cant seem to find any info in this forum regarding this equipment.
im trying to acess device with browser but no sucess, can anyone help?
-
Any status on this? ???
cant seem to find any info in this forum regarding this equipment.
im trying to acess device with browser but no sucess, can anyone help?
contacted the dlink support and they reply that home devices do not have any acess except with they app dlink home.
this is just a bummer since i dont have a dhcp server on my network and i cant setup ip configs of the camera. the same with my sensos and smartplug...
(https://image.ibb.co/ctUThw/2.jpg)
-
All Home products are Home app only supporting.
-
All Home products are Home app only supporting.
yes, its what dlink support says... unfortunately....
if i knew that i didnt choose these dlink products, had to buy a new ap just for these devices.
-
::)