Topic: How to Get 300Mbps Link Speed in DIR_605L??? (Read 5870 times)

rohitjaiswal · « **on:** October 04, 2013, 11:48:14 PM »

hello sir,
i have purchased this dir-605L two days back for better performance than Dir-600L.

I bought 605L for getting 300mbps speed but still i am getting maximum of 150mbps.
please tell me how to configure it for getting 300mbps.

Regards,
Rohit.

FurryNutz · « **Reply #1 on:** October 05, 2013, 11:11:47 AM »

2.4Ghz Routers only: Try single mode N
Channel Width set for Auto 20/40Mhz
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only.
If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, HT 20/40 Co-exhistance and Extra Wireless Protection if you have it. Recommended settings are default. Under Advanced/Advanced Wireless.
Enable WMM Enable Under Advanced/Advanced Wireless.
Try setting Medium or Low power output settings and test again Under Advanced/Advanced Wireless.

You'll need to check with the device client Mfr to see weather or not those devices you connect are supporting of 300Mb WiFi connections on 2.4Ghz.

D-Link Forums

News:

Author Topic: How to Get 300Mbps Link Speed in DIR_605L??? (Read 5870 times)

rohitjaiswal

How to Get 300Mbps Link Speed in DIR_605L???

FurryNutz

Re: How to Get 300Mbps Link Speed in DIR_605L???