D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-936L => Topic started by: mxtree9 on July 31, 2017, 05:24:46 PM
-
I was using a router provided by Comcast originally. Purchased my own router Arris and now my camera will not connect to it. I tried to run the mobile app on my android phone mydlinklite to configure but the camera does not present a blue light on the rear, which is part of the set up process I have pressed the reset button for 10 seconds and it only flashes green. I pressed the WPS button on the top of router, my camera power button flashes green, then flashes red. It fails to set up.
What am I doing wrong here?
Any help would greatly be appreciated.
BTW-I am a newbie with this device.
Thanks for any help-
Michelle
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using on the main host router.
There is no Blue LED in the rear, there is a Green LED and a Amber or red. It's one LED however does 3 colors. None of them blue.
I would try using the SSID name and PW of the main host router to see if you can add the camera using that process.
-
I'm located in New Hampshire- USA
Arris SURFboard
Cable Modem & Wi-fi router
AC1600
Model SBG6700-AC
Wireless Modes????
-
With my camera plugged in now to power- it is flashing red light
-
What wireless modes are you using on the main host router?
Mixed Modes, Single G or N?
What security modes are you using on the main host router? WPA or WPA2? WPA2 and AES is recommended for this camera.
-
FurryNutz. How do I find out this info that you ask? Total newbie with this stuff
Thanks for your help.
-
Log into the modem/router combos web page. Refer to your ISP or modem Mfr for help and information regarding this. Try 192.168.100.1.