Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mjoyce91]

Hello, I'm just posting that I haven't had any problems with the new firmware.

[Jammrock]

Here's a small bug for you.  I just loaded 1.03 build 02 and discovered that if you set the Device Name (Basic -> Network Settings) over 15 characters the DGL-4500 will go into a reboot cycle.  You have to revert to factory settings (hold reset down for 10 seconds) to get out of it.

[Lycan]

Thanks for the feed back, I'll check in to that one.

[Jammrock]

One more bug, and this one is EXTREMELY annoying!  My WAN connection drops for about 5 seconds every 1-2 minutes.  Considering I have two VoIP lines and work from home this is a really bad thing.

This doubt this is a Vista or ISP thing either since the drops occur on my VoIP phones and as a test I connected my laptop directly to the cable modem and experienced no "WAN drops".

My cable modem is:

Terayon TJ 716X Rev C

And in case you want it:

OS1: Vista SP1 32-bit Buniness
OS2: Vista SP1 64-bit Ultimate
VoIP1: Vonage Linksys router thing
VoIP2: Polycom SoundPoint IP 430 SIP

Thanks,
Jammrock

Update: I did a factory reset on my router as a test, configuring only my ISP and wireless settings, and the problems persists.

[Jammrock]

Seemed to be overheating, btw.  Set the router up on the side and the issue went away.

[FromAtoN]

What issues did 1.11 cause for it to be pulled?

[haha-pwned]

Want to roll your dgl-4500 firmware back to 1.15 right now?  The two links below have the fix. This
is not a joke.  It works.  Both sites are very reputable and people have tested it.

http://www.ispgeeks.com/wild/modules.php?name=Forums&file=viewtopic&t=4224#15926

and

http://www.dslreports.com/forum/r23720820-downgrade-possible-DGL4500-12xNA115



Christmas was a little late this year but better late than never!

[FurryNutz]

v1.22NA is working great.