• March 19, 2024, 01:37:27 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSR-500 and 500N Firmware Update  (Read 82798 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
DSR-500 and 500N Firmware Update
« on: July 11, 2012, 07:27:26 AM »

Firmware: v1.04 B58   5/23/2012
Revision Info:   
1. New IPv6 features include IPv6 over PPPoE and IPv6 prefix delegation.
2. IPv6 web management enhancement.
3. Support DHCPv6 leased-clients pages.
4. User database management enhancement.
5. Support policy based user database.
6. Support policy based captive portal.
7. Support PPTP VPN client mode: DSR could be a VPN client connecting to
a PPTP server and share this PPTP tunnel with users behind DSR.
8. Add new Internet settings, WAN3 setting: WAN3 interface is designated to 3G
connections via USB dongles. (Available on DSR-1000/1000N only)
9. Support SMS (Short Message Service) features. This feature is available
when a USB 3G modem is connected to DSR router and 3G WAN interface is
not configured as dedicated WAN mode or load balancing mode. Also, please
make sure your service provider allow your SIM card to send/receive SMS
through 3G network. (Available on DSR-1000/1000N only)
10. Update CLI commands including VPN utilities CLI support.
11. Enable classical and NAT routing option in PPTP server configuration.
12. Support Firewall rules over VLAN.
13. IPSec VPN enhancement: allowing users selecting multiple integrity,
authentication and encryption method for phase1 & phase2 negotiations.
14. Support a check box to block all URLs for Web site filtering feature. If users
add some approved URLs, these URLs will be allowed.
15. It’s able to show logging message through CLI.

Get it here: DSR-500
Note: Link is for the DSR-500 however the FW file located here is one in the same and will work on the DSR-500N model.
Please review the upgrade PDF documentation before upgrading.
« Last Edit: April 13, 2018, 08:57:11 AM by GreenBay42 »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 and 500N Firmware Update
« Reply #1 on: December 16, 2013, 01:01:51 PM »

Firmware: v1.08 B77   11/12/13 World Wide Region
1. Support more external Authentication server types for Captive Portal/SSL
VPN/ IPSec user authentication. Available external authentication server
types: NT domain, RADIUS, LDAP, AD and POP3.
2. Support L2TP Client Mode: DSR can establish site-to-site L2TP tunnels to
another DSR.
3. Bandwidth Control enhancement: DSR can accept IP subnet for source IP
addresses when configuring bandwidth management profiles
4. Support GRE tunnels. Supported GRE tunnel numbers varies in different
models - DSR-1000 series: 20; DSR-500 series: 15 ; DSR-250 series: 10;
and DSR-150 series: 5.
5. Support Layer 2 Bridge Mode: DSR can bridge DMZ (WAN2) with LAN port 1
in the Layer 2 level together.
Note: Only DSR‐500 and DSR‐1000 series support Layer 2 bridge mode.
6. Expand maximal IP-MAC binding (DHCP IP reserved) restrictions. Maximal
numbers varies in different models - DSR-1000 series: 128; DSR-500 series:
96; DSR-250 series: 64; and DSR-150 series: 32.
7. Support CAPWAP pass-through: DSR can recognize CAPWAP tunnel packets
and allow them passing through LAN sides.
8. Support D-Link DWM-157 A1 USB 3G modem.
9. Increase IPSec pre-shared key length to 64 characters.
10. IGMP enhancement: allow IGMP packets traversing DSR without specifying
source IP addresses.
11. Reduce Boot-up spent time.
12. L2TP performance enhancement

Get it here:
DSR-500N
http://support.dlink.com/ProductInfo.aspx?m=DSR-500N

DSR-500
http://support.dlink.com/ProductInfo.aspx?m=DSR-500
« Last Edit: December 28, 2014, 03:39:14 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 and 500N Firmware Update
« Reply #2 on: December 28, 2014, 03:48:40 PM »

Firmware: v1.09 Builds   04/14/2014 thru 10/14/2014 World Wide Region
1.09B61_WW 1. More 3G USB dongles support: add D-Link DWP-156 A1 and DWP-157 A1.
1.09B59_WW None
1.09B38_WW
1. L2TP client mode enhancements: support MPPE and demand dialing.
2. User DB enhancements: support PPTP/L2TP tunnels external authentication though AD, LDAP and POP3.
3. Bridge mode enhancements: support QoS and firewall rules.
4. Spillover mode enhancements: both WAN1 and WAN2 will respond requests, e.g. ICMP, IPsec, etc., from Internet even when spillover threshold is not
triggered.
5. PPTP VPN enhancements: allow PPTP severs to assign remote clients the same subnet as the local LAN.
6. Russia Dual Access enhancements: allow users to designate the outbound interface for IGMP control packets.
7. Web GUI enhancements: support auto parameters fill-out in the DHCP server configuration page.
8. CLI enhancements: support the “space” character.
9. More 3G dongle supports: add D-Link DWM-156 A7, D-Link DWM-157 B1, and D-Link DWM-158 D1, HUAWEI E303.
10. A new click button to quickly download Dbglogs.
11. A new checkbox to enable/disable auto config backup.
12. A new checkbox to enable/disable config file encryption.
13. Support a Windows-based config viewer for encrypted config files.

Get it here:
DSR-500N
http://support.dlink.com/ProductInfo.aspx?m=DSR-500N

DSR-500
http://support.dlink.com/ProductInfo.aspx?m=DSR-500
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 and 500N Firmware Update
« Reply #3 on: January 29, 2016, 07:24:48 AM »

Firmware: v2.02WW_Updated   08/05/2015 World Wide Region
New Features:
1. Brand New Web GUI design.
2. SSL VPN supports external authentication database.
3. Dynamic Web Content Filtering (subscription is required)
4. Support DHCP ranges for all subnets.
5. Support VLAN on WAN for single VLAN ID.
6. Allow using a particular IP or VLAN to access GUI.
7. Support more 3G USB dongles: add D-Link DWP-156 B1 and DWP-157 B1.
8. OpenVPN enhancement: LAN subnet is accepted to be configured as the
network of OpenVPN server.
9. External HDD compatibility enhancement: Support up to 2 TB HDD.

Fixes:
1. Fix Port forwarding (HTTPS/PPTP) issue. (DEUR20140626000004)
2. Two windows wireless clients can’t ping to each other when the security
mode is configured as WPA/WPA2/WPA+WPA2
(DRU20140826000002)
3. Help content enhancement: WAN IP address should not be configured as
primary/secondary DNS server IP address. (DLA20140619000005)
4. Will not accept to install the CA certificate without common name.
(DEUR20140623000007)
5. Fix WAN port speed issue with Cirrus CPE. (DI20140307000005)
6. Fix unable to import the blocked keywords and approved URL csv files
which are exported by DSR. (DRU20140709000004)
7. The PPTP client can’t access to LAN PC when all traffic is bound to a specific
WAN port with protocol binding. (DEUR20140617000001)
8. Fix the issue that HTTP server can see the internal IP of DMZ instead of
external IP. (DEUR20140714000008)
9. Fix unable to configure DSR as OpenVPN server with firmware version
1.09. (DEUR20140729000007, DI20140804000004)
10. CLI issue: Does not accept valid CIDR subnet mask via CLI.
(DI20140618000001)
11. Fix unable to set the firewall rules with the same service but different
schedules. (DRU20140521000004)
12. Fix missing TOS bits issue when using VLAN and QoS in the WAN port.
(DLA20140619000005)
13. Fix known issue: voice at LAN side client is not heard when the SIP Proxy
resides in LAN.
14. Wireless TCP receive side throughput performance with Veriwave is not
good (IxChariot & over-the-air is OK).
15. Fix PPTP pass through taking highest priority than PPTP firewall service.
16. Fix IPSEC pass through taking highest priority than IKE outbound firewall
service.
17. Fix the issue opening LAN clients page takes too long time.
18. Fix known issue: Blank field for "data to supply to CA" when click view
button in Self certificates requests page.
19. Multicast traffic can’t go smoothly on the wireless of DSR.
(DRU20110426000001)
20. Fix known issue: device keeps sending log to syslog server after the
configuration of server IP address is removed.
21. Fix mismatch between configured and displayed transmit power.
22. Fix known issue: transparent mode doesn’t work on WAN2.
23. Fix known issue: USB storage issue with Windows XP.
24. Add the description about 'Response to Ping' in the help page of PPTP and
L2TP servers.
25. Fix known issue: IPSec tunnel can’t be established when the configuration
file which is exported from another device is imported.
26. Fix Unstable WLAN issue. (DEUR20120611000010,
DEUR20120718000007, DEUR20120905000005)
27. Fix firewall rule by schedule issue. (DRU20140521000004)

Get it here:
DSR-500N
Select DSR and 500N

DSR-500
Select DSR and 500

Select the v2.02WW_Updated file.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 and 500N Firmware Update
« Reply #4 on: September 13, 2016, 07:16:14 AM »

Firmware: v2.11 B301 WW   4/7/2016 World Wide Region
DSR-500N Rev A1 Only!
New Features:
No Release Notes

Fixes:
No Release Notes.

Get it here: D-Link Germany
DSR-500N
DSR 500N



Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
DSR-500 and 500N Firmware Update
« Reply #5 on: November 10, 2016, 07:23:02 AM »

Firmware: v2.11 B201C   11/9/2016 World Wide Region
DSR-500 and 500N Rev A Only!

Fixes:
49 new fixes. See release notes.

New Features:
1.   PPTP/L2TP VPN Client auto dial-in feature
2.   User’s group and group’s privileges edit support
3.   Updated max number of wireless clients
4.   Wireless IGMP Snooping support and Multicast to Unicast
5.   LAN IGMP Snooping support
6.   OSPF support on L2TP over IPsec
7.   Category filters for device logging
8.   Support configurable IPsec backup policy
9.   Support WCF 3-month trial license
10.   Support multiple OpenVPN clients with the same certificate
11.   Alerts via SMS for WAN/IPsec/CPU/RAM events
12.   Support source port configuration for custom services
13.   Multi-language support for DSR-250N B1
14.   Support Omni SSLVPN client
15.   Select verified DDNS services:
     a.   DynDNS
     b.   D-Link DDNS
     c.   FreeDNS
     d.   NO-IP
     e.   3322.org
     f.    Oray (existing in M7)
     g.   Custom

Get it here:
DSR 500
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 Firmware Update
« Reply #6 on: January 24, 2017, 10:35:59 AM »

Firmware: v3.10 WW   01/24/2017 WW/RU Region
DSR-500 Rev A1 and B1 Only! Also includes the DSR-1000AC, not the DSR-1000.
New Features:
1. PPTP/L2TP VPN Client auto dial-in feature
2. Support User’s group and group’s privileges edit
3. Updated max number of wireless clients
4. Wireless IGMP Snooping support and Multicast to Unicast
6. OSPF support on L2TP over IPsec
7. Category filters for device logging
8. Support configurable IPsec backup policy
9. Support WCF 3-month trial license
10. Support multiple OpenVPN clients with the same certificate
11. Alerts via SMS for WAN/IPsec/CPU/RAM events
12. Support source port configuration for custom services
13. Multi-language support
14. Support Omni SSLVPN client
15. Select verified DDNS services:
a. DynDNS
b. D-Link DDNS
c. FreeDNS
d. NO-IP
e. 3322.org
f. Oray (existing in M7)
g. Custom


Fixes:
89 fixes listed in release notes.
ftp://ftp2.dlink.com/PRODUCTS/DSR-1000AC/REVA/DSR-1000AC_REVA_RELEASE_NOTES_3.10_EN_WW.pdf
Known Issues:
19 issues listed in release notes.


Get it here:
DSR-500
DSR-1000AC



Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 and 500N Firmware Update
« Reply #7 on: August 01, 2017, 04:55:23 PM »

Firmware: v3.11 WW/RU   8/01/2017 World Wide Region
DSR-500/1000 Rev B1, DSR-500AC/1000AC Rev A1 Only!

Fixes:
36 new fixes. See release notes.

New Features:
1. Static route can be displayed in Route Information
2. Support HT80 for RU wireless Domain.
3. OmniSSL VPN support SSL Certification generation
4. IPv6 VLAN support.
6. Support VLAN/IPSec base Radius Authentication.
7. Hostname display support for DHCP clients.
8. Support RADIUS accounting and interim update.
9. Support IPv6 stateful and prefix delegation.
10. Device support 3G/4G dongle with pin code password.
11. DWM-221 & 222 LTE Dongle support.
12. DWM-156 A8, DWM-157 C1 and DWM-158 E1 dongle support.
13. Support PPTP/L2TP client mode auto re-connect.
14. Support single IP or IP range to be Whitelist and Blacklist for URL filtering
and Web Content Filtering.

Known Issues:
1. HTTPS brute force attack prevention failure.
2. Unable to get IP using DWM-156 A3.
3. InterVLAN firewall rules are not getting updated properly after changing the LAN/VLAN subnet.
4. UDP scan is showing Closed for 'zeroconf' port when Stealth Mode enable.
5. login password is plaintext in Http packet <RU firmware>
6. Device can respond the unused port in LAN side.
7. DWM 156 A8, DWM 221 B1 and 157 C1 are unable to support PIN code password authentication.
8. Unable to see WAN physical port interface at static route drop down menu.
9. Unable to reach maximum log amount after pressing clear all button.

Get it here:
DSR 500
DSR 1000AC
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSR-500 Firmware Update
« Reply #8 on: December 06, 2018, 01:10:57 PM »

Firmware: v3.13 WW/RU   12/6/2018 World Wide Region
DSR-500 Rev B1 Only!

Fixes:
DSR-500 v3.13WW Release Notes

Get it here:
DSR 500
« Last Edit: December 06, 2018, 01:16:09 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.