• March 28, 2024, 10:50:05 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-890L list of devices connected don't show IPs!  (Read 5784 times)

lurker501

  • Level 1 Member
  • *
  • Posts: 3
DIR-890L list of devices connected don't show IPs!
« on: September 18, 2018, 02:32:30 PM »

I have a D-Link AC3200 DIR-890L  HW version A1, Firmware version 1.20
Its connected to Comcast cable through a Motorola Arris SURFboard SB6141
I have devices copper connected as well as wireless.
For some reason there are devices that will show the IP address (some even IPV6 as well), but there are others that show "UNKNOWN VENDOR" and no IP address!
I know the devices are connected and working, example: Netgear ProSAFE Plus switch (JGS524Ev2)  I have tried with that device both with a dynamic address from the dlink router, as well as a static address outside of my DHCP pool.  Neither setting will show the vendor or the IP address for the switch.  But I can see the MAC address if I click on the pencil.
Now I can see if maybe Netgear decided to go with a newer vendor for their internal NIC on the switch that maybe D-Link doesn't have in their firmware, but not showing an IP address???  Even when the D-Link server itself GAVE the address to the switch???

DIR-890L


Netgear Switch

Anyone have any ideas as to what might be causing this issue?

Thanks.
« Last Edit: September 18, 2018, 02:43:20 PM by lurker501 »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-890L list of devices connected don't show IPs!
« Reply #1 on: September 19, 2018, 07:13:15 AM »

Link>Welcome!

  • What region are you located?

Possible NG switch issue and how the DIR handles handshaking and trying to get information from the switch. This is a managed switch:
https://www.netgear.com/support/product/JGS524Ev2.aspx
Possible setting ont he switch that is effecting how the DIR router gets it's information from the switch. Might be a STP issue maybe.
This would be something D-Link would need to review.

I can help test this as I recently acquired a D-Link DGS-1100 managed switch however I presume it should work. I'll pass this along to D-Link for review...

You might contact NG support about this switch and ask them if there is any internal settings that would prevent product information and or IP address information from being collected by routers, NG or non NG router Mfrs.

Also do you have another router that you can test with to see if that router sees the switch correctly or not?
« Last Edit: September 19, 2018, 09:29:20 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

lurker501

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-890L list of devices connected don't show IPs!
« Reply #2 on: September 19, 2018, 10:36:13 AM »

I’m in the Midwest of North America.
I could see how you might think that it might be the switch, but then how do you explain the HP printer circled that is plugged directly into the d-link router?  Or other devices that don’t show IPs?  Also, if it was a Spanning Tree issue, wouldn’t there be other problems with communications?

I contacted Netgear and they didn’t have anything in the switch that would deny the router the information needed to list manufacturer or IP.  In fact they said they never heard of this issue before.

I would suspect it’s the D-link router that doesn’t have the information needed to display manufacturer and IP.  The strange thing is that when I click on the pencil next to the entry for this switch it actually list the MAC address. With that information alone it should automatically be able to know that this is a netgear product, so I don’t know why it says “unknown vendor”.
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: DIR-890L list of devices connected don't show IPs!
« Reply #3 on: September 19, 2018, 10:41:14 AM »

I will pass this along to the router group. Not sure why this keeps happening.

Does everything work OK on your network?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-890L list of devices connected don't show IPs!
« Reply #4 on: September 19, 2018, 10:58:52 AM »

This issue seems to keep appearing here and there for this router. I presume there is some form of handshaking issue going on with certain devices.

Does the HP printer have a Hostname that you can edit? Most of the time, D-Link routers look at the host name value and captures this to input in to the clients UI...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: DIR-890L list of devices connected don't show IPs!
« Reply #5 on: September 19, 2018, 11:02:50 AM »

DIR-890L will send ARP request every minute, and will add the client to the client list if it received an ARP response from the client.
If it can’t receive ARP response from the connected client 3 times, router will remove it from client list.

If the ARP response drops, this can cause incomplete info in the client list.

Do you have QoS enabled? Try disabling it and see if the behavior continues.

Use a different browser and make sure cache is cleared. Try connecting in incognito mode.

Are the clients that have incomplete info connected to the netgear switch?
Logged

lurker501

  • Level 1 Member
  • *
  • Posts: 3
Re: DIR-890L list of devices connected don't show IPs!
« Reply #6 on: September 19, 2018, 05:02:23 PM »

Before I continue, I appreciate your responses.  Thanks!

GB, yes everything seems to be working fine on the network.  maybe a little slow on the wireless performance, but either wise OK.
Thanks for passing the issue to the router group.

Furry, the HP printer does have a Hostname, if you see in the screenshot above it is listed as HP8710-HPD0E509.  I just realized that this is an older printer that hasn't been connected in weeks (maybe months).  There is no reservation on this printer so I don't know why its still on the connected clients list.
In fact, that printer isn't even plugged in!!!

GB, doesn't the ARP requests have to be sent to an IP?  If the router is sending ARP requests to my switch, and getting the MAC address, why does my router not know the IP address that it just sent the ARP request to?  I'm still confused as to how the router can give an IP to my switch (DHCP), then not know what IP it gave to the switch!

Also, a few devices including the previously mentioned printer haven't been connected in a very long period of time and are still showing up in the client list.

QoS is not enabled

I tried Microsoft Edge/Chrome/Firefox on my PC as well as Safari/Chrome/Firefox on my iPad Air and Chrome on my Samsung Android tablet.  All in both normal and incognito/private modes.

some of the clients are connected to the switch and some are wireless.  both 2.4 and 5ghz

I have now disconnected everything directly connected by copper to the router with the exception of 3 connections.  1 from my ISP, 1 to my Ooma phone device, and 1 to my Netgear switch.

How do I clear the connected clients list so the router refreshes everything?  I don't understand how there are devices on the list that have not connected in weeks/months?

maybe a refresh would force the router to go back out there and see my switch properly?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DIR-890L list of devices connected don't show IPs!
« Reply #7 on: September 20, 2018, 06:46:39 AM »

I would try a factory reset...
Make sure the FW on the printer is up to date as well. Set up a new Hostname on the printer before connecting it to the router maybe.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Logged